Power Steering Return Line Options Please

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 9, 2008
Threads
10
Messages
40
I have searched several threads and seen some references too, but no definitive answer that I can see.

Today I attempted to replace my Power Steering Reservoir. However, I could not get the return line off (the one that goes to the cooler). So, I put the old reservoir back on. But while doing so, I notice that that return line had many cracks and of course, with all the pushing and pulling, it is now seeping like crazy.

Toyota wants to sell me 44420-60221 for $356 which is just stupid. No way I am going to the trouble to replace a perfectly good PS cooler.

Anyway, has anyone simply just bought some hose from NAPA or an auto parts store and used that to replace this hose? I only ask because I noticed it is wrapped with some kind of plastic spiral thing (heat shielding maybe) and it has a formed bend in it.

If anyone has replaced it, what size hose (ID & OD Please) and I assume fuel hose would be good.

Thanks
 
I used 3/8" transmission cooler rubber hose, about $10.00. Just take a piece of hose to the auto parts store. For the high pressure line I had one made for $40.00.
 
My PS return line started leaking, so I took it off, and had a new one bent up for me. I decided to reroute it as well, since it was much easier to install, and is slightly more protected from road salt. You could easily bend one up yourself if you wanted it to remain metal, but I'm sure rubber hose and zip tie would work. Heres some pics of my kustom PS return line.

1st pic...drivers side frame mount, you can kinda see the new line runing straight at you, instead of taking a turn and running to the front of the truck.

2nd pic....passenger side frame mount. Once again you can kinda see the new PS return line running straight at you, instead of turning to th front of the truck

3rd pic...front view, the high pressure line looks like it will go soon. This is where the return line was mounted, but now its on the other side.

Good luck
driver side PS.webp
Pass side PS.webp
Front View PS.webp
 
Back
Top Bottom