Power Steering Pump

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 17, 2016
Threads
30
Messages
80
Location
Texas
Hey Guys, I need a new power steering pump in my 94. Haven't ever tackled that before. It looks to be pretty accessible. Curious how challenging of a job it is for a novice mechanic. Anyone point me to a thread/youtube with step-by-step instructions?

Appreciate all the help this forum provides. Ya'll have saved me lots of money and made my Cruiser life lots of fun.
 
The FAQ has a few write ups. Just did one a few months ago, and it was straight forward. Hardest part was getting the banjo bolt loose as it was on pretty tight, and was using extensions to it. Took me 2hrs to remove old one, swap the gear to the new one (OEM Toyota) and re-attach and bleed. Not bad at all. Use the method of bleeding which you attach the power steering pump except for the pressure side hose (with banjo bolt) and fill with ATF until it starts pouring out. Then tighten and resume bleeding procedure.
FAQ for 80/LX450 -Mar 2015 -Added Battery Information Thread
 
Back
Top Bottom