Power Steering Pump issues

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 5, 2003
Threads
30
Messages
318
Location
20711
Here is my problem.

My P/S pump was weeping, then leaking....

Took me for ever to get the original pump out and get a new rebuilt one in. Though I was done with this job, but a week or so later, the new"?" pump took a s#%t and started pumping fluid ouy by the cupful.

Looks like the rear seal went on the replacement, but the original may be rebuildable..

My question to the group is this...

What is this hole for?????
This is where the original pump seems to be leaking, and there is nothing there on the "new" pump.

Upper right, just outside the rear cover.
s-l1600.webp
 
There are a number of threads about this.

Hopefully you have the plug that blew out of it.

If you do, then shove it back in the hole, clean the hole with brake ckeaner, the JB Weld it in.

If not, you have to find the RIGHT freeze plug or rubber plug and do the same thing.

It is requured for machining and is NOT part of the rebuild kit.
 
Back
Top Bottom