Possible deal

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Not that my .2 is worth anything but I'm not feeling the angles. If I had to choose I'd pick the right side.
FILE0072.jpg

I'm tending to lean to far to the right these days and it looks to offer more protection if your blazing a trail :lol:
Any samples on the rears for the 80 yet :hhmm:
 
Volunteer said:
Not that my .2 is worth anything but I'm not feeling the angles. If I had to choose I'd pick the right side.
FILE0072.jpg

I'm tending to lean to far to the right these days and it looks to offer more protection if your blazing a trail :lol:
Any samples on the rears for the 80 yet :hhmm:
Click to expand...
not yet!! hopefully this weekend!

If one was to perhaps post up a dwg. on this pic of what they would like for the tube structure... that would be of help!


I'll post pics of the bottom base of the bumper, right now it looks bleek, but have no fear!

Our goal is to bring 3 of the fronts and at least 1 rear. we will see what happens this weekend!

FJC links and sliders are coming with us as well as a set of 80 sliders!

Please post up with what you would like to see on the front bumper, it wont hurt our feelings if you don't like what we have come up with so far!!! let- er- rip!

Thanks

Justin
 
I like the short side (left)
 
I don't have an 80, so my opinion is not important here. If it were important, I would suggest not crossing through the head light beam. I would either lower the left side to be under the head light or raise the right side to be above the head light. The bumper looks good to me except for that.

Good luck guys.
 
All I know is that you're never gonna get that truck cranked with that jumper cable where it is.:)
 
Pic 6 of 12 looks about perfect to me - not helping the real question I know, but I bet that, unlike ARB when I asked them, yall might build one w/o the laundry rack top piece....

Nice job guys - mine's a minor market view, but you could ponder an option w/o tubing after you get the top section thing tied down.

W/ the deer bouncers in place, I'm thinking like Tony - keep 'em below the headlights.
 
TroutBear said:
Pic 6 of 12 looks about perfect to me - not helping the real question I know, but I bet that, unlike ARB when I asked them, yall might build one w/o the laundry rack top piece....

Nice job guys - mine's a minor market view, but you could ponder an option w/o tubing after you get the top section thing tied down.

W/ the deer bouncers in place, I'm thinking like Tony - keep 'em below the headlights.
Click to expand...


we voted to do just that, no tube, no powder coating!!
then you can do what ever you would like!!

Justin
 
Last edited:
Justin,

When are you guys arriving?

Later,
 
RLMS said:
we should be leaving tue or wed, it depends on how much stuff we can get done!!

justin
Click to expand...

Yawl crashing at the casa.....?
 
You must log in or register to reply here.

Share this page

Back
Top Bottom