Portaled 80 Weight

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Empty, or loaded for trails?

-Spike
 
GRB-

Two questions:

1. Any ballpark on the weight of the portals themselves?
2. Ballpark the price, for both front and rear, of Volvo 303 portals.

I have located both front and rear portals, a couple states away. If I decide to pull the trigger, not sure whether to drive and pick-up or ship. Also, do you feel that $4,000 is too much for refurb condition?
 
GRB-

Two questions:

1. Any ballpark on the weight of the portals themselves?
2. Ballpark the price, for both front and rear, of Volvo 303 portals.

I have located both front and rear portals, a couple states away. If I decide to pull the trigger, not sure whether to drive and pick-up or ship. Also, do you feel that $4,000 is too much for refurb condition?

Both axles together weight about 650#, if you can get a set of refurbished Volvo portals for $4k you should get them.
 
who woulda thunk!?

I was thinking for some reason that those would weigh more than 650 combined.

thanks for the weight spex, I have a set of Mog axles that I got a deal on (no I wasnt considering putting them under an 80!) But I am definately considering the Volvo swap under one of my 80s

I will help you do a Toyota V8 swap if you help me do a set of Volvo ports!!?:D ;)

I really like your 80, thats thinking outside the box!!
 
Thanks for all the info! I too would have thought +650lbs..

I know you pulled the locker actuator's from the same vehicle, but what did you do about the wiring? Did you pull that as well, or use off-the-shelf? I can source the valves, curious about the connection.

Other than a little fabbing, my only hesitation to do the swap would be the possibility of lack of parts, in the future.
 
I know you pulled the locker actuator's from the same vehicle, but what did you do about the wiring? Did you pull that as well, or use off-the-shelf? I can source the valves, curious about the connection.

Other than a little fabbing, my only hesitation to do the swap would be the possibility of lack of parts, in the future.


All the locker setup is straight out of the volvo, vaccum only no wires I even used the valves. I did add a vaccum pump to back up the engine vaccum.
TLC_60.jpg

TLC_61.jpg

TLC_61b.jpg
 
Back
Top Bottom