Popping from back when braking.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 9, 2006
Threads
110
Messages
2,158
Hello all, I searched for about an hour, but couldn't find exactly what I am confronted with. I don't know if it is my u-joints or something totally different. It seems to be from the back drivers side.

But to start with, I have a '92. So of course drum brakes, and the semi floater. I have no idea what it could be, I noticed this morning on the way to school. It doesn't happen every time I stop, but occasionally when applying the brakes and coming to a stop, I get a popping or clunking noise that sounds like its from the drivers rear. I didn't hear it till I turned off the radio. I have rebuilt my front axle, but have not torn into the rear yet. Any thoughts? Thanks in advance for the help. Oh, and it doesn't sound muffled like it could be someting INSIDE the axle (hopefully not :)) It sounds like it is outside.
 
Your brakes may not be applying evenly or worn evenly. Check the pads and see how badly they are worn. Pull both sides, put them side by side, and you can post a pic here if you want a second (and third and fourth and fifth and....) opinion.

Also make sure that everything is moving smoothly. You may have something bound back there.

Don't put it off. When I got popping/grinding from my rear brakes, it was due to the cheap brake pad breaking in half and the piston was riding on the rotor directly. Hopefully yours isn't the same cause (it's not cheap).
 
Your brakes may not be applying evenly or worn evenly. Check the pads and see how badly they are worn. Pull both sides, put them side by side, and you can post a pic here if you want a second (and third and fourth and fifth and....) opinion.

Also make sure that everything is moving smoothly. You may have something bound back there.

Don't put it off. When I got popping/grinding from my rear brakes, it was due to the cheap brake pad breaking in half and the piston was riding on the rotor directly. Hopefully yours isn't the same cause (it's not cheap).

X2, This happened to me and it was not cheap and I had to use inferior carquest reman calipers instead of HQ CDan parts becuse I needed it fixed quickly to go to work. The piston had ground almost completely ground down to nothing.

Take a look at the calipers asap.

Edit: Inspect the drums, that's my guess.
 
Okay haven't had time to take it apart yet, but I got it to do it one more time on the way home. The brakes actually weren't applied, but it was after I had applied them and was coasting very slowly. It has not done it at speed, at least not that I can tell. Just at low speeds. So, it does it without the brakes on, but I think it has to do with them. How hard is it to fix the drum brakes? Never worked on them really. I'll search!! : ).
 
They aren't terribly difficult. Having the FSM handy will help greatly.
 
Okay found some stuff.

1- My exhaust mount rusted through on the one towards the back of the muffler so now the pipe going over the transfer case can contact it. I don't know if this is the cause of the noise. Maybe...

2- The front sway bar is slightly loose on the bushing where it connects to the frame rail on the drivers side. ( I think this accounts for another annoying noise, but only a squeak.) The rear is loose in the same place, but on the passenger side.

I don't know if either of these would cause that noise, especially the second one. But maybe the first one just gets a harmonic going through the exhaust system sometimes when I'm slowing down and hit a bump right or something. I'll weld it back up and see if that solves. But I'm worried if thats not it, whatever "it" is could screw stuff up before I can look into it this weekend. I guess I'll find out huh. :).
 
Back
Top Bottom