Plastic headlight shields ???

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Doug:

Does this stuff just prevent grit from etching the glass or does it actually help with a big stone (well, bigish) hit? ie. does it actually help absorb the energy of the rock hit?

Cheers, Hugh
 
There's always a rock big enough, but the 3M film is designed to absorb the energy of road debris. It was originally developed to protect the leading edge of carbon fiber helicopter blades, so it's engineered to absorb impact.

This will officially cross the line into "too much information" but here goes. When I got into the business 3 years ago I decided I needed a way to prove its effectiveness because nobody had ever seen the stuff around here. I had some metal plates made out of sheet metal and painted with automotive paint. Then I covered half with the thinner paint protection film and went out to the shooting range. At 85 yards, #6 steel shot 12 guage shells will blast the paint to bare metal but only dent the film. My 3M vendor found out about them and now I have a little side business selling these shotgun demonstration plates to 3M. I'm sure by now I'm on a BATF watch list due to my consumption of 12 guage shells......

So, it can absorb a lot of energy, and the headlamp protection film is almost twice as thick as the film I use in the shotgun test. I've done other wacky demonstrations with it as well.

DougM
 
IdahoDoug said:
I've done other wacky demonstrations with it as well.
DougM


Doug,

Weren't you the one who got a used window or windshield or something to test the effectiveness of the emergency window breaking thingie, too? Or am I confused?

Anyway... the film sounds sturdy enough to me. :D

Mot
 
Yes, that was my test of the automotive rescue tool I have mounted to the rear of both 80's center consoles. A year or so ago a magazine tested some crap American knockoffs and declared all of them useless. Mine are the brand used by German ambulance and rescue personnel. So I got a window and had my wife see if she could break it. As you can tell, I'm into verification.....

Can't believe you remembered that episode.

DougM
 
IdahoDoug said:
As you can tell, I'm into verification.....

Can't believe you remembered that episode.

DougM


*L* I too remember that ..... did you also try the crazy ass replication drill I wrote out ? :rolleyes:


:D
 
erics_bruisers said:
why bother... really?

how many people have ever lost a headlamp to a stone-chip?

just curious --

e

I lost two headlamps in 6 months back in '01...one somewhere in WA, one somewhere around the Four Corners. Luckily, they were sealed beam H4's Toyota used on their 60's and first gen. minis, so I was able to get a replacement at the Napa in Shiprock, NM, while on a road trip. Lost a turning signal lamp on my mini one winter in Upstate NY (stone was about 3/4" ).
 
It sounds like something I'd want on my windsheild. I don't mind the headlights so much. They are replaceable, but a shattered windsheild could lead to worse damage.


Kalawang
 
It won't work on windshields due to wiper abrasion, unfortunately. Even the latest generation polycarbonate windshields for racing won't withstand it. Good ol' super hard glass is still the best.

Tyler - what was the "replication" thing??

DougM
 
Endless,

If you had a film on your windshield, then it was not 3M. 3M specifically prohibits it, and I would not do it for safety reasons. Likely you had one of the many cheap imitations out there - probably the brand made in L.A. judging from your signature.

DougM
 
IdahoDoug said:
Endless,

If you had a film on your windshield, then it was not 3M. 3M specifically prohibits it, and I would not do it for safety reasons. Likely you had one of the many cheap imitations out there - probably the brand made in L.A. judging from your signature.

DougM

Imitations??? :D yeah sure you dont know Doug :D :cheers: i dont deal with any cheap imitations :D All part lists on my cruiser mostly you cant get it and although you can its gotta be custom made one or travel to overseas to get 'em.
My real signature-https://forum.ih8mud.com/showthread.php?t=12127&page=3
Usually imitations stuff where the majority of the group could afford and get it easily :D I dont copy/imitated others but i stands for the only one & one of the kind ;)
 
Last edited:
IdahoDoug said:
Tyler - what was the "replication" thing??

DougM


Gawd , don't ask :D . I think it involved trying to replicate a worst case scenario , in which case the car has rolled off the road into a stream or something .

Suggested you take the person and make them sprint a half mile ... push them around a bit ... throw a pail of chilled water in there face while they are blind folded . Spin them round and round till totally disoriented , and them strap them in the car .... did I mention earplugs ? It will all replicate the adrenaline dumb they'll experience . Then have them try and find the tool , cut the seatbelt , roll down the window and climb out ..


Best down in a quiet junkyard :D


And you think you're into verification .. ya light weight !


;)
 
T Y L E R said:

Suggested you take the person and make them sprint a half mile ... push them around a bit ... throw a pail of chilled water in there face while they are blind folded . Spin them round and round till totally disoriented , and them strap them in the car .... did I mention earplugs ? It will all replicate the adrenaline dumb they'll experience . Then have them try and find the tool , cut the seatbelt , roll down the window and climb out ..


Tyler,

Were you paranoid or did you have a phobia of some sort at the time? :rolleyes: :D
 
Heh, that's probably about 50% as bad as what it's going to feel like if you roll into a river at night. Just add screaming, glass and your CD's all over your lap, a mild concussion, a sprained wrist from the airbag, the bow of your trailered boat sticking through the back hatch... etc. Not pretty.

To the question whether these are available for the LX450s, I'm not sure. I custom cut all my headlamps but the pattern for the LX is listed as the same for the Cruiser and that's clearly not right. I've got a call in to the Keepers Of The Patterns and will know by the 28th deadline.

DougM
 
IdahoDoug said:
It won't work on windshields due to wiper abrasion, unfortunately. Even the latest generation polycarbonate windshields for racing won't withstand it. Good ol' super hard glass is still the best.

Tyler - what was the "replication" thing??

DougM


DougM,


That's too bad. I would have been looking for that product otherwise. I already have a small chip on my windsheild that I have to get repaired soon. The windsheild is too upright to offer much resistance to flying pebbles. I wish Toyota had tilted it a bit.

For the meantime, as added protection minimal as it is, I have an extremely light tint that I think gives added resistance. It's so light most people don't see it except for the break.


Kalawang
 
why bother... really?

how many people have ever lost a headlamp to a stone-chip?

just curious --

e
Owned my LX 450 less than 2 months. Lost a front windshield and now drivers side head light to rocks.
 
Anybody who wants a 3M headlight kit, I'll sell 'em for $46.30 a rattle including shipping. This is 3M's premium headlamp film in a precut kit - you install them with water in 10 minutes and it includes the blinker and parking light covers for LC/LX. Lifetime warantee against any discoloration or chalking. For forum members, I'll double the warrantee period....heh.

Send me an email (no PM's!!) to: dmiller@fliptag.com by Feb 28.

DougM

Holy thread resurrection!

Doug,

Do you still sell headlight film? If so what is the current price (I'm guessing the price has changed in 5 years)?

thanks
 
Back
Top Bottom