Pin out for drivers windows & locks

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 5, 2006
Threads
404
Messages
1,234
Does anybody have a pin out for the plug that feeds the windows/lock switch’s on the driver’s arm rest ?

Seems I have no windows on the left side. Since both front & rear windows don’t work seems like a wire feeding 12v is broken.
 
what year specific , i have paper EWD's for a wide spread
 
Nuts, should have posted the year.

I’m looking for help on a 1993
 
Does anybody have a pin out for the plug that feeds the windows/lock switch’s on the driver’s arm rest ?

Seems I have no windows on the left side. Since both front & rear windows don’t work seems like a wire feeding 12v is broken.



let me know if this is what u are looking for ?
 
DSCN8870.webp
DSCN8871.webp
DSCN8872.webp
DSCN8873.webp
DSCN8874.webp
 
Every thing works except the DS windows front & rear
Do the windows work on the passenger side? Do you have the window lock on the driver's control panel turned on?
 
hey @RAGINGMATT

Probably bad form to hi-jack my own thread, but I found a better way to troubleshoot my window motor issue. On to another problem, maybe your 1993 EWD can help me with.

I recently completed and LS swap. Pulled out most of the Toyota wiring harness, and knitted in the Chevy harness. She starts, she runs, all dash gauges work (except the speedo) . but I cannot get the elockers to ingauge. Just blinking locker lights on the dash. All the sensors from the Tcase come up to EC1 connector. Do you have something that shows me what wires are in the EC1 connector for a '93 with elockers ? Also a drawing of the tcase, that will show me which sensor is the VSS (speedo), which sensor is the CDL, etc?

EC1.webp
 
Back
Top Bottom