Pillow block...which one

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 4, 2005
Threads
60
Messages
328
Location
West Frankfort Illinois
Hi,
I have a '71 cruiser I am converting to power steering. When researching, all the write-ups I have read say to use the TPS73 pillow block on the firewall. I called TPI4x4.com and they said my year needs a tps72. I wanted to confirm this, since it is a bit more in price and looks a little different. I want to make sure I get the correct part. Is there a different place to get this part for under $50?

Thanks guys!!

BTW...the pitman arm is a nut cracker to get off...hehe
 
Grainger.

Measure your steering shaft, it is about 19mm or .750" dia.
All the pillow block does is support the shaft at the firewall.

Based upon the year of your tub and the clearance you have, you can decide on the length and width of the flange for the pillow block.

HTH

john
 
From tech trivia section here - PS conversion column support bearing: Kilian F-350-89 flanged bearing. ID is 19.1 mm, OD is 34.9 mm. (around $6.00)

You can paypal me the difference in price ;)

HTH
 
I got mine from Grainger.

Grainger Item # 1F548
Price (ea.) $16.39
Brand DAYTON
 
Haystax-

yep...expect that any second now ;)

hehe Thanks for the heads up on that..I am all about saving $$ when I can. that is what is so great about this forum.

llih-
Thanks for the info.

redcorn-
I will do just that, measure and have no doubts.


thanks everyone.
 
Back
Top Bottom