Parting out FJ62

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Do you have a dash grab bar?
 
Wadesters said:
Do you have emission parts available? Looking for an air rail and smog pump adjuster bracket.

thanks...

Wadesters, I have the air rail. 30 +shipping. I'll have to check w/ my pops tonight about the bracket. I know he took it off, just have to find it. Thanks, Josh
 
grrlscout89FJ62 said:
Thanks!! You need to clear out some PMs so I can write you back. And glad you like the shirt! :D


Done. What I really need to do is by a star!
 
82-SOA-60 said:
Do you have a dash grab bar?


It is spoken for, I think. I am waiting to hear from potential buyer. (SLOwag are you still interested?)
 
Cube Dweller said:
Does the 62 have an antenna up/down switch? Does it mount flat or is it curved like on the 91-92 fj-80's?


Yes it has the switch, but it's spoken for. I'm workin on it nuclearlemon, haven't forgot ya!
 
yodafrick said:
Sorry, it's sold.

No worries. Thanks for following up!
 
yodafrick said:
Yes it has the switch, but it's spoken for. I'm workin on it nuclearlemon, haven't forgot ya!
no worries, like i said, i'm in no rush.
 
I am looking for and willing to buy immediately (to spruce up my 89 FJ62) - contact via goldader@gmail.com please:

- drivers door window regulator (heck, all window regulators if they are in good working order)
- center console armrest (if brown and w/ unbroken mounts)
- speedometer (if in good condition)
- antenna mast (motor not needed)
- 4WD solenoid (pic attached at bottom)
- hood support bar

would be willing to consider accessories if you have them - winch, safari racks, etc....

thanks
Vacuum Transfer Shift Assembly.webp
 
Yodafrick,
I need a front bumper with mounts and endcaps (really bad) and a grill (not concerned about chrome as long as it is not cracked). Thanks.
Todd
 
getto said:
Yodafrick,
I need a front bumper with mounts and endcaps (really bad) and a grill (not concerned about chrome as long as it is not cracked). Thanks.
Todd


Todd- these parts are both spoken for, but if either sale falls through, I'll contact you. Thanks, Josh
 
If still available: plastic guard(cover) for the auto shift and any of the pieces parts for the auto (handle, bolts etc), O2 sensors, boot for the e-brake.

BTW, where in Ct are you, originally from Suffield. Still have relatives in Windsor, Stafford and E. Hartford. Thanks.

Mike
 
mpeagan said:
If still available: plastic guard(cover) for the auto shift and any of the pieces parts for the auto (handle, bolts etc), O2 sensors, boot for the e-brake.

BTW, where in Ct are you, originally from Suffield. Still have relatives in Windsor, Stafford and E. Hartford. Thanks.

Mike


Mike- Everything you need is available. I'm wrenchin on my 60 for a wheelin trip tomorrow, but will get back to ya either Sun night or Mon. Thanks, Josh

I'm located in good ol' Durham.
 
Interior:
Driver's door power window switch unit (grey color)
Needing on passenger door window switch (also grey)
The Dash Padding that isn't cracked (dark grey)
Shifter knob w/ side button for automatic (dark grey w/ chrome trim)
Plastic trim pillar between seat belt and latch bolt for top of rear seat (this is a tan color, needing both sides)

Exterior:
Front and rear chrome bumpers with end caps
Rear hatch lock assembly (my lock works but the fixture rusted off)
Rear license plate light fixture (my light fixtures are falling out due to rust)
Mudflaps for all four corners
Chrome power mirrors for both sides (my chrome is bubbling up)

Engine Bay:
Needing the vacuum actuators that take truck in and out of 4-wheel drive via vacuum line pressure, there are two solenoids grouped together on the firewall that perform this function (I see goldaddy has got these called for, but if the deal falls I'm working on and his does also, I'll claims dibs on yours.)

I can send a money order or may paypal, your choice. I prefer paypal to pay you though. It's faster and much easier.

Thanks for your time,
Robert
Sporttrucker@hotmail.com
 

Users who are viewing this thread

Back
Top Bottom