-
Updated Classifieds system, post your NEW classifieds here - IH8MUD Classifieds
Parting 83 and 84 Toyota 4x4 Mini Trucks in Spokane, WA
- Thread starter RIDDLER
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I need some parts from the 1983:
1) driver side headlight and bezel complete.
2) driver side and passenger side marker lights.where the headlight go.
3) front grilled.
4) complete front bumper with turn signals and corner and brackets.
5) driver side rear combination stop/turn signal light complete.
6) driver side front fender.with clearance light. (black if possible)
7) combination radiator,overflow and washwer bottle.
the large parts might be an issue due to shipping, How about giving me prices and ill check on shipping. Thanks
1) driver side headlight and bezel complete.
2) driver side and passenger side marker lights.where the headlight go.
3) front grilled.
4) complete front bumper with turn signals and corner and brackets.
5) driver side rear combination stop/turn signal light complete.
6) driver side front fender.with clearance light. (black if possible)
7) combination radiator,overflow and washwer bottle.
the large parts might be an issue due to shipping, How about giving me prices and ill check on shipping. Thanks
How much do you want for the front knuckles out (knuckles, hubs, outer birfields, steering arms) on either one of the trucks? And shipping to 55417?
- Thread starter
- #8
Front disc conversion
Hello- I want to get $300 for the front disc conversion parts including all the parts below and the OEM Aisin hubs. This is pretty much the going rate. They sell for this all the time on EBAY and often for closer to $500 on EBAY if in good shape.
"How much do you want for the front knuckles out (knuckles, hubs, outer birfields, steering arms) on either one of the trucks?"
And shipping to 55417? I only charge the actual shipping charges, no handling fee's. I won't know the shipping until it is removed and packed up. Maybe $75 to the East coast, $65 to the midwest.
Email me direct if you want the setup. Next weekend they go on EBAY along with the mini PS conversion.
thanks
Aaron
Hello- I want to get $300 for the front disc conversion parts including all the parts below and the OEM Aisin hubs. This is pretty much the going rate. They sell for this all the time on EBAY and often for closer to $500 on EBAY if in good shape.
"How much do you want for the front knuckles out (knuckles, hubs, outer birfields, steering arms) on either one of the trucks?"
And shipping to 55417? I only charge the actual shipping charges, no handling fee's. I won't know the shipping until it is removed and packed up. Maybe $75 to the East coast, $65 to the midwest.
Email me direct if you want the setup. Next weekend they go on EBAY along with the mini PS conversion.
thanks
Aaron