Part identification

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 29, 2018
Threads
14
Messages
84
Location
Texas
Can anyone tell me what this part is on my intake? I put my elbow where it didn’t belong.

F0BE43A8-84F1-46E1-B733-28EC606371DD.webp
 
Also, is there an intake removal pitty party group I can join. I’ve had a lot of intakes off in my time turning wrenches. This 4.5 intake had me frustrated. Took me 1.5 hours to get the bastard off. It’s too cold for this. Haha
 
Move to warmer climate ?
 
I've read the gas filter dampens the vacum to the fuel pressure regulator. To prevent harsh or sudden changes in fuel pressure.
So you'd presumably leave the fpr open to atmosphere. Not sure what this will do exactly in the short time before you fix the old filter or get a new one. Maybe a little less mpg?

I dont really know squat but I say run it with the filter port plugged to prevent vacum leak and dont worry about till you repair or replace the filter. Repair would be to epoxy a fittin on there to plug the vacum line back in.

My uneducated opinion is worth every bit ofwhat you paid for it!
 
I’ll put it all back together and see what happens. It’s not my daily, but I still like to drive it.

Thanks for the help.
 
Back
Top Bottom