Panhard w/ SOA ?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 8, 2002
Threads
17
Messages
190
Planning some changes to current suspension and am considering this, guess along the lines of what Spidertrax offers the Zuki crowd.

Opinions?
 
My work truck 01 Ford 1 ton, using 2/leaf parabolic type soa, uses one and a big ole sway bar as well.
My work truck drives better (highway) than my Forty .

Sure I think the multiple leafs provide more locating support than parabolic type leafs, but just doing some drawing board stuff before I dive into a re-hash of the forty's suspension.

Also never really sure about axle movement, the 70's year saginaw pwr box really masks this stuff...unless I tweak the wheel too much while at hwy speeds.
 
well if you think about it, only one leaf in the pack locates the axle, so you have one skinny leaf on your 40 against a much larger one on your work truck. My front axle kicks around a bit on my 40 cause my shakles are pretty long, really dosn't bother me though panhards with leaf springs are silly and could potentially really limit flex.
 
i have a panhard on my fj and it does limit flex, but there is almost no body roll when turning on the road. i feel much safer during highway driving now that i have it. i think the it would be ideal to have one with some sort of disconnect.
 
missipboy said:
i have a panhard on my fj and it does limit flex, but there is almost no body roll when turning on the road. i feel much safer during highway driving now that i have it. i think the it would be ideal to have one with some sort of disconnect.


.

Are you using TRE's or other type of bushing on the bar ends?

I would appreciate a picture if possible, and thanks for the reply
 
The theory behind running a track bar on a leaf sprung vehicle is to reduce bump steer.

But yes, it can limit flex.
 
here's a couple of pics. the bushings look like leafspring bushings.
panhard1.webp
panhard2.webp
 
Back
Top Bottom