p/s pump problems

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 11, 2004
Threads
173
Messages
1,774
Location
tunica, ms
just finished my power steering conversion-saginaw box, gm style pump. when i turn the wheel all the way to one side the pump binds up and stops turning. it works fine turning the wheels.
there is a threaded hole in the back of the reservoir and i put a bolt in there to keep fluid from coming out. does that have anything to do with it?
 
I would think that if it works fine turning from stop to stop, without dead-heading the pump by holding the wheel at lock against the stop, that the pump is fine. Typically when you put a power steering pump against the relief, you get a good belt squeal and the pump makes some noise also, but it does not 'lock up' and stop turning...


Did you do any modifications to the flow control spring/spool behind the bulkhead fitting in the pump where the pressure line attaches?
 
Back
Top Bottom