Over heating while coasting down hill?!!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 31, 2008
Threads
4
Messages
347
Location
Littleton, Colorado
After our last Leisurely trip to Bill Moore lake, as we returned home after a great day on the trail, we had a small problem! As we returned to Denver coming down Floyd hill we started to over heat... now I dont work at Lockheed Martin so I could be wrong! But overheating while coasting down a huge @SS hill can't be a good thing:steer:! We were able to control the heat enough to get home, but were having some major motor probs which included no power and a terrible idle. So long story short after refilling coolant and bla bla bla.. HEAD GASKET!!:bang: So there she sat in our driveway for 2 weeks. But she is running now so here are a few pics!

This is a picture from earlier that day!!
350217762_fkuPt-M.jpg


Here is our 3 ton paper weight!
357533881_ViHRU-M.jpg


Manifold and Intake off also wiring harness
357522812_U5V7Q-M.jpg


Valve cover off
357523154_33dDs-M.jpg


357522804_85BbN-M.jpg


Here is the head off, pistons exposed. Gasket blew on cylinder number 1 (note clean piston head).
357522784_j6YK2-M.jpg


Here we are working on putting it back together.
357533917_5wvAt-M.jpg


Cruiser finally running and burning out the coolant.
357523050_wMyiD-M.jpg


Thanks to a great friend who works at Toyota, parts = $339.00. Cruiser is running great now! :clap:
 
Thanks..it was the best shot of the day.
 
Smart to air down the front tires to get the work done. Nice pics! :)
 
:doh:Too bad I didnt do the "PHH" while I had the head off!:doh: Lots harder to do 2 weeks after putting it all back together!
 
Back
Top Bottom