Other Brake M/C's?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

GM booster and MC, needs an adapter for the firewall.
You can get the adapter from MAF (pic of mine below).

I remember someone made a little adapter for the GM M/C to firewall, just for the M/C, no booster. Let me do some searching, I had a similar thread a while back.

P1010100.jpg


P1010002-1.jpg
 
Anyone use and M/C from a vehicle not of Toyota? I keep hearing of a vette m/c but cant find the application.

What kind of brake calipes do you have? You can use some Chevy corvette brakes, but you'll need an adapter between the booster and MC (available from www.rockstomper.com). I would only recommend this option if you have large brakes such as a Dana 60. I use a Corvette MC from a 1978 with factory 4 wheel power disk brakes. These have 1.125" bore.

Here is a link to Rockstomper's adapter. These are well made and worth the $40.00 Scott charges.
http://www.rockstomper.com/catalog/brakes/gmtoymaster.htm

If you're running stock axles, you can use Toyota. Some use a Supra, FJ80 without ABS, or T100 brake MC. These will have 1" or bigger bore so you will lose pedal pressure.
 
Guys, thanks for the great info. I am going to GM 3/4ton axles since they were laying around doing nothing in the yard. I am still on the fence with going to a 60 front. My running gear is a 383/700R4/soon to be installed D300
 
I'm running an unboosted 75 Corvette MC on my 64 with mintruck front brakes and the standard Chevy/Monte Carlo/Poser rear disks. I built my own 2-stage adapter plate similar to Degnol's (but not as pretty). Works great and I don't lose boost when/if the motor ever dies. IMO, the pedal feel is great and is still way less of a workout than the clutch pedal.
 
Back
Top Bottom