Options and Prices

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 4, 2005
Threads
36
Messages
116
I have the opportunity to purchase an extremely clean FZJ80. It is a high mileage truck (for me but not for LCs :)) 300k. No lockers. $3k

The kicker is I am told by the mechanic that is storing the truck that it needs a new engine

What are my options and approx $$

Rebuild the 1FZE ??
Swap in a Vortec ??
Buy a reman 1FZE $3500
Diesel - Would love too but too much cashola

I am checking it out on Thurs and will have more info. This thing is killing me - Having trouble deciding between waiting for the right, locked, slightly built truck and getting killed by the :princess: for buying a project.
 
I think everyone West of the Mississippi is going to tell you the same thing. $3k is a joke for junked engine 80 especially considering there is 300k miles of someone else's ass essence in those seats. :flipoff2:
 
check out the thread on the GM atlas inline 5 swap. Instead try going with the inline 6 for more horsepower and torque and better mpg's than the 1FZFE.
 
Again tho even throwing an atlas in there, $3k IMO is to high for a starting point. Engine may be bad sure, but we know how long these trucks can go if maintained. 300k bad engine, what else is toast??
 
....that's $1,000 truck.

And be ready to spend a fair amount to replace many worn out parts.

You'll be in for the motor swap just to get it running, then probably brakes, axle rebuilds, new fluids, any radiator/coolant system needs/issues...

could be a good buy if you're up for a project since the initial cost "should" be very low.
 
Speaking from over 40 years of experience building all kinds of "projects" from a 75 F100 390 4x4, 88 513 Cadillac powered 4x4 Suburban, 68 351 powered Bronco, 87 K5 427 powered Blazer, 04 SD V10 F250 4x4 to stock cars I raced I can truthfully say that all projects will eventually cost you twice as much as first estimated + 10%. :D To do the Vortec thing will cost at minimum about $6000 if you're good with wrenches and lucky. To rebuild your present engine depending on whats broken figure at least $3000 and again if you're lucky. Now if you're good and lucky you might shave a little but don't expect it. A 300k rig isn't worth much and the $1000 number many are suggesting is pretty accurate. Usually what you get is wore out, needs almost everything and the parts really start to eat into a budget and then the :princess: starts in on you. By then you're wondering why you ever went this direction.:bang: Ask me how I know.:grinpimp:
 
times X on the $1k (or less) price.

It would be cheaper for you (in the long run) to buy a clean low mileage truck on the west coast and fly out and drive it back, or have it shipped back.

If you want a huge project, then a truck like this sounds like the ticket. Over here on the west coast, people practically can't give trucks like these away. (There's an absolutely beat '93 or '94 locally that's been sitting for months upon months at $3k, they finally just put "make offer on it." I'm thinking of offering $500 and parting it out. And I don't think this one has a blown engine, either.)

There's one I saw an ad for locally for $6k for a 96 LX450 (link).

To give you an idea of price range, both my trucks were in excellent condition with around 125k miles on them. My mechanic both times told me he never see's trucks that old in that good of condition. The :princess: truck was $10,500, and mine was $9,000. (We bought hers a year before we bought mine, shows how the market dropped.)

For $3k you'll probably end up spending as much fixing it up as I bought either of mine for....and still have a 300k old truck, with all that entails.

If you see one one the west coast you like, there's likely to be a MUD member fairly close who can check it out for you. I almost bought a truck in Texas and did exactly that, before I found mine locally.
 
Back
Top Bottom