onboard air done! Steps, pics to follow

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Onboard air system

I like your system. I built one long ago you can view 100 series LC/LX FAQ ~ Mods ~ Air system.
Mine's worked flawlessly for air ups, tools on tear downs and lockers. I used a collector on my intake to keep moisture out of the system. Mine is fully automatic from 85 to 115 lbs. Heat and vibration is never a problem. The only time I notice it when it comes on in the store parking lot and people passing by stop and stare to see if something is wrong and then it just shuts itself off when it charged to 115 lbs. which take about 20 seconds when it drops below 85 psi.
I thinks it's one of the best and most used mod's Ive done.
Bloodhound:cheers:
 
Yeah... I might add a tank, pressure swicth and move my quick connects from underneath the hood.. So many ideas, so little time..

As it is now, I need to open the hood, turn the compressor on, connect to one of the sides...


I like your system. I built one long ago you can view 100 series LC/LX FAQ ~ Mods ~ Air system.
Mine's worked flawlessly for air ups, tools on tear downs and lockers. I used a collector on my intake to keep moisture out of the system. Mine is fully automatic from 85 to 115 lbs. Heat and vibration is never a problem. The only time I notice it when it comes on in the store parking lot and people passing by stop and stare to see if something is wrong and then it just shuts itself off when it charged to 115 lbs. which take about 20 seconds when it drops below 85 psi.
I thinks it's one of the best and most used mod's Ive done.
Bloodhound:cheers:
 

Users who are viewing this thread

Back
Top Bottom