OME heavy ???'s

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 10, 2006
Threads
87
Messages
2,188
Location
North Pole, AK
Okay I am about to pull the trigger on a OME lift thanks to a unexpectedly large tax return.
I have a ARB bullbar with a Warn M12000 winch and lights in the front, and tow a small boat trailer and travel trailer in the summer. I plan on eventually adding a rear bumper/tire carrier and sliders.
Should I go with the 2.5" heavy/heavy combo, heavy/medium combo, or J-springs in the front and heavies on the rear?
I have 1" spring spacers from Slee already. My main concern is a good ride, and level stance under unloaded conditions. WIll the 1" spacer be enough to keep the front even with the rear with just the 2.5" heavy lift? Sorry for the Newbie questions, but I want to get this right the first time, and I do not have any fellow 80 lovers in Alaska to bounce these questions off of.:o

Thanks
TK
 
heavy/heavy for your current & eventual setup...don't look back!
 
Can't tell what lift you should go with but I can tell you what I have that may help you decide on what will work for you:

'97 LX with OME heavy front and rear

Front: ARB, XD9000 winch, synthetic rope, Slee A/C dryer skid plate
Rear: Slee rear bumper with tire carrier and usually 3rd row seats installed
Center: Metal Tech sliders, Slee skid plate

Ride: pretty stiff unloaded. Not unbearable but noticeably stiffer than my stock 80. Loaded the rear end seems to ride smoother.

Unloaded I have a slight stink bug look which I don't mind. Loaded pulling a popup camper, tools & camping gear in back, etc. she seems to sit pretty darn level.

For pics look at post #14 here --> https://forum.ih8mud.com/80-series-tech/161778-your-80-f-o-r.html


I've read that some people opt for the mediums in the rear and either live with the butt sag when loaded are put in some air lift bags to help. Guess it depends on how often you tow or are loaded down compared to unloaded, and whether having a stiffer ride is of concern or not.

HTH
 
I just bought my truck a month ago and luckelly the stock tires were bad so just had to get some new 295 Nitto TGs. By the way they are great and don't rub on stock suspension. I am just about to pull the trigger on heavies also but I am also concerned about the ride without new bumpers, sliders winch, etc. which I plan to add later this year. I am amazed that Corsair still has a rough ride with all the add ons because I have read that others think the ride is great after the add ons. Maybe it is all in th eye of the beholder.
 
Last edited:
I installed the 2.5" OME heavy/heavy and my LC rides better than it ever did stock. I also have the ARB on front, Slee step sliders, and plan to get a 12,000lb winch and rear tire carrier. I am very happy with my lift and set up. Hope this helps, Scott
 
Mediums in the rear were a complete waste of time, and all I carry is a bunch of tools and gear on a relatively light 80 with tube bumpers, not the heavier aftermarket bumpers. Go heavy or go home!
 
So Bikeman, how would you describe the ride with heavies and no major weight?
 
So Bikeman, how would you describe the ride with heavies and no major weight?

Firm, but not as bad as an empty 3/4 ton truck. Not as bad as an add-a-leaf put into a leaf spring pack. I like the ride.

The heavies keep me from having to run a rear sway bar even loaded down with the roof rack and RTT.
 
Cool, Would y'all go with the 1" spacers in the front with heavies to level out the rig or skip it? It will be awhile until the rear bumper is approved by the boss, so I just want to make sure the rig looks level until the time comes.

TK
 
Here's a pic of the Cruiser with the ARB/winch and stock springs. Pretty saggy. I do have 1"more in the front now with the Slee spacers, but it's still pretty bad.

TK
cruiser2.webp
 
Here's a pic of the Cruiser with the ARB/winch and stock springs. Pretty saggy. I do have 1"more in the front now with the Slee spacers, but it's still pretty bad.

TK

I have same the winch/bumper set-up plus dual batteries and with heavies all the way around mine had the same rake the your pic.

For what its worth to get mine to sit level I went with Js and 1.5" spacers in the front, here it is on the old 285s
lcarb008.jpg


I wasn't so worried about the "stinkbug" look, I was trying to get the back to at least a 2.5" lift in the front .....with the current set up I'm a little more than 3".

Remember with lifts ... just like a diet .... YOUR RESULTS MAY VARY ;)
 
I have same the winch/bumper set-up plus dual batteries and with heavies all the way around mine had the same rake the your pic.

For what its worth to get mine to sit level I went with Js and 1.5" spacers in the front, here it is on the old 285s


I wasn't so worried about the "stinkbug" look, I was trying to get the back to at least a 2.5" lift in the front .....with the current set up I'm a little more than 3".

Remember with lifts ... just like a diet .... YOUR RESULTS MAY VARY ;)

Looks good where did you get your 1.5 inch spacers. Any driveline issues in front. I'm trying to get rid of my "stinkbug" look I have 850's in the front and 864's in the rear. I have ARB in the front and no rear bumper at the moment. Majority of the time its unloaded so I'd like to level it off. Thanks.
 
It recently occurred to me that OME is the suspension equivalent to Fosters.

In the US, Fosters is a premium lager and "Australia for Beer".

In Australia, Fosters is pretty much Budweiser.

Which means you are paying a premium for Budweiser.

How do you feel about that?

Here are the Budweiser Boobs for reference.
images.webp
 
Back
Top Bottom