OK...here are the pics!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 12, 2007
Threads
23
Messages
65
Location
Salem, UTAH
Finally here are some pics... I have been rather busy researching this whole viscous coupler LSD issue that has the transfer case seized (Fake continuous CDL lock)...

I will be tearing into next week and depending on the dealers willingness to help out with a new VC $$ will replace, or just remove.

Has anyone beside MIKEP done this?
https://forum.ih8mud.com/80-series-tech/124794-tutorial-removing-viscous-coupler-photos.html

Love to here how its working out for people and if it is the route I should go.
LCside.webp
LCrear.webp
LCfront.webp
 
Wow, nice rig. Very clean. Interested to hear how your VC r&r goes...
 
Wow... the paint looks perfect!
 
Finally here are some pics... I have been rather busy researching this whole viscous coupler LSD issue that has the transfer case seized (Fake continuous CDL lock)...

I will be tearing into next week and depending on the dealers willingness to help out with a new VC $$ will replace, or just remove.

Has anyone beside MIKEP done this?
https://forum.ih8mud.com/80-series-tech/124794-tutorial-removing-viscous-coupler-photos.html

Love to here how its working out for people and if it is the route I should go.

I have been running without my VC for over a year now. No complaints at all.

Great colour, btw!
 
Thanks Iron Yuppy. I am still debating whether to "DELETE" (nice phrase) or replace$$$?

Do you have the CDL switch and 7 pin mod done? Does having or not having VC affect these mods in any way?

Sliders would be nice, but I can't think of what else to do with tax rebate.
 
Thanks Iron Yuppy. I am still debating whether to "DELETE" (nice phrase) or replace$$$?

Do you have the CDL switch and 7 pin mod done? Does having or not having VC affect these mods in any way?

Sliders would be nice, but I can't think of what else to do with tax rebate.

I have the CDL switch and the 7-pin mod.

You can't remove your VC without having the manual option of your centre diff lock. The switch is a must if you delete the VC. It's a Simple procedure, as the wiring harness is already there - all you have to do is buy the switch and pop it in the dash.

The 7-pin is nearly as easy. Instead of carefully pulling the wire, I just cut it and taped the ends. Done and done.


edit: BTW, I just read your other post. The reason I removed my VC was because it was seized. It can happen. Apparently the PO drove it around like that for over a year, which as you can imagine caused all kinds of unnecessary wear in the front end - tures were bald, the seals were leaking, and the birfs were still serviceable, but near the end of their lives.

To give credit where it's due, it was "Upsidedown" on this board who removed the VC for me during other service. He and "RADD Cruisers" own a shop near my place. He kept the coupler and was going to do an "autopsy" on it, to try and learn how/why it failed, but I don't know if he ever did.
 
Last edited:
Back
Top Bottom