Oil question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 12, 2007
Threads
30
Messages
207
Location
San Diego, CA
I know this is probably the stupidest question ever, is a good thing I'm a rookie, anyways, what type of oil do i need for xfer case and diffs? and how much? thanks a lot guys:grinpimp:
 
I know this is probably the stupidest question ever, is a good thing I'm a rookie, anyways, what type of oil do i need for xfer case and diffs? and how much? thanks a lot guys:grinpimp:

Ulyses....

The 80 Series FAQs are your friend :D. Conveniently found at the top of the 80's forum in the sticky threads...

https://forum.ih8mud.com/showthread.php?t=84888

Here is Chapter 4 which contains the fluid FAQs amongst many other GREAT things:

https://forum.ih8mud.com/showpost.php?p=1012356&postcount=6


FWIW I run Mobil 1 75W/90. Seems like Redline is also a popular choice if you can find it in your area.
 
Corsair,
thanks a lot, i started reading the faq's but i didn't go all the way to the bottom
 
No problem :)

It helps me to remember what is in there when I post up the link. Amazing amount of information in there. Romer et. al. have done a phenomenal job of typing it up, compiling it, and structuring it to make it super easy for us to find just about everything a person could need!
 
Mechanic @ Toyota told me 75/90 in front diff and x-fer case. 80/90 in rear diff.
 
Mechanic @ Toyota told me 75/90 in front diff and x-fer case. 80/90 in rear diff.

From my Factory Service Manual, for my 96:

Front:
Viscosity: SAE 90 (above 0 degree F)
80W or 80W-90 (below 0 degree F)
Capacity: 2.9 quarts (w/o diff lock)
2.8 quarts (w/diff lock)
Oil Type: Hypoid Gear Oil API GL-5
Drain and Fill plug Torque: 39 ft lb

Rear:
Viscosity: Same as front
Capacity: 3.4 quarts
Torque: Same as front
Oil Type: Same as front

Transfer Case:
Viscosity: 75W-90
Capacity: 1.8 quarts
Oil Type: API GL-4 or GL-5
Torque: 27 ft lb

:beer::cheers:
 
Back
Top Bottom