Oil filter flow rate question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 7, 2006
Threads
27
Messages
205
Location
Seattle
I want to use one filter type for my 80 and two civics to save money with the NAPA master pack.

The NAPA gold 1515 and 1348 for the 80 flows 7-9gpm and the one for my civic flows 9-11gpm.

So would the lower flow rate filter or higher flow rate filter build more pressure in the system???
 
you would need to know whether the figures given are specific to the different oil pumps in the Civic and 80 or whether they are a standardized figure given for a specific inlet pressure for example. If the former, then apples and oranges and you can't tell. These numbers likely don't mean much.

The real question is which of the 2 offers the largest pressure drop for a given flow rate (read obstruction). And then you'd need to know the pump curve (which is probably positive displacement and so pure volume vs rpm).

And also of course how they behave when dirty can vary.

I'd say too many unknowns, stay with the filter designed for the engine. (To me that also means OEM.)
 
Back
Top Bottom