OEM distributor cap

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 27, 2005
Threads
161
Messages
648
Location
ATL. GA.
I am running a non-usa distributor I got from TPI several years ago in my 75 fj40. Does anyone know which oem distributor cap I need to get. SOR shows 3 different ones as follows for these years
74-77 & 9/73-77
9/77-12/78
1/79-7/80
anyone know which one is the right one and what the toyota part number is?
 
kkt said:
I am running a non-usa distributor I got from TPI several years ago in my 75 fj40. Does anyone know which oem distributor cap I need to get. SOR shows 3 different ones as follows for these years
74-77 & 9/73-77
9/77-12/78
1/79-7/80
anyone know which one is the right one and what the toyota part number is?
The 9/77-newer dissys have screwdown caps in USA.

If your dissy has clips to hold on cap, then it uses either the 75-77 cap or the E-74 cap.

E-74 dissy is 3-1/8" diameter.
75-77 dissy is 3-1/2" diameter.
 
dist. cap for non usa dist

FYI it is the E74 one. This according to tpi 4x4 where I got the original distributor.
BYW they sell the whole tune up kit for the non-usa dist. for only 23.00. That sure seems like a good price, I think at the dealership just the cap would be about that much. tpi part number is 19100T
 
You can always call CDAN with the id number from your distributor and he can look up the correct cap. I tried ordering from one of the vendors and got a cap that didn't fit worth a crap - hence engine wouldn't run until I got one from Dan. With his discount, there wasn't much difference to go original equipment!
 
Back
Top Bottom