O2 Sensor wire color codes help

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 25, 2007
Threads
111
Messages
1,102
Location
Charlotte, NC
I am installing an 02 simulator on a 97 FZJ80.

Can anyone tell me what color wires are for:

a-sensor signal
b-sensor ground
c-heater +12v
d-heater ground

This is for the secondary o2 sensor.

The plug has

solid orange wire
yellow wire with red stripe
brown wire with black stripe
solid white wire

Thanks! :beer:
 
When you find out, I'd love to know as well with all the trouble I've had with one of my sensors. I'm especially interested in the solid white wire. Mine and at least Moj's has an out blue sheathing with wire in it like coax cable. FIL sent wiring diagrams and 'I think' that particular wire goes to ground, but I don't know where!
 
I don't have ime to search now, but I swear there was a recent thread in regards to this. I will look later. GL.
 
Factory ECU wires are:

Blue = signal
White = ground
Black = heater
Black = heater

So A goes to blue wire, B goes to white wire, C goes to one of the black wires that has 12v power and d goes to the other black wire.
 
I don't have ime to search now, but I swear there was a recent thread in regards to this. I will look later. GL.

I saw it. Unfortunately no help. :frown:
 
Factory ECU wires are:

Blue = signal
White = ground
Black = heater
Black = heater

So A goes to blue wire, B goes to white wire, C goes to one of the black wires that has 12v power and d goes to the other black wire.

You had me excited for a minute, but my wires are:

solid orange wire
yellow wire with red stripe
brown wire with black stripe
solid white wire

:confused:
 
Wrench has good info on your factory wiring, I guess you'll need to find out which simulator wires are for what. Ground should be simple, and a signal wire. If your heater wires don't simulate the correct resistance you'll get a trouble code, I had that problem when Autozone sold me the new ceramic heater style Bosch sensor.
 
Back
Top Bottom