O2 Sensor randomly pegging when warming up

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 26, 2010
Threads
27
Messages
134
Location
Southern KS
Only sometimes, with no rhyme or reason, my '97 will run rough (rich with a bit of black smoke) after a cold or cool start. My Ultra Gauge will show at or near 1.240 on the upstream O2 sensor. My STFT drops into the -15 to -20% range during this as expected. Sometime it shows the rich condition shortly after starting, while still in open loop. Sometimes it jumps high about the time it enters closed loop. Sometimes it doesn't do it at all but rather climbs up into normal range like it's supposed to. Once things warm up completely it goes back to normal. This started after a HG replacement. I replaced the O2 sensor about a year before that. I've checked connections and all look good. Occasional P0401 is my only error code. Any ideas of where to look? Thanks!
 
What brand O2 did you replace it with? Toyota/Denso?
 
Yes. It's an OEM sensor.
 
I've got nothin'. Sorry.
 
It has me stumped as well. Working fine the lat two days.
 
Back
Top Bottom