O.K., here I go

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 23, 2005
Threads
201
Messages
594
Location
SoCal
I bought this '74 for for what I thought was a good price b/c the frame appears perfect and the body is virtually rust free; what's present is minor surface rust. I'm going to remove the body and the first thing I'd like to find out is how to fix the sag in the front part of the roof. Hopefully the crease in the parts that extend outward to support the front of the roof can be seen in the pics I chose to upload. Can they be straightened well enough to be made to work or do I just shop for new ones. If so, are new ones available? Once the parts are done right or replaced, will the roof straighten out and form up as it should?
The F engine has not been started since being rebuilt and what I bought was what you see. Go back next week for the rest of the parts.
I expect y'all are gonna be tired of me & my questions b/f too long. I've rebuilt a '67 Brono but know zip about Cruisers. Looking forward to this, however. :-)
Thanks for any suggestions you can offer on the roof issue.
Vic
Redlands, CA.
 
Last edited:
put it on the rig and you will see it don't fit . As you push down( clamp down) or otherwisw force top down at B pillar you will need to hammer the creases out as it comes down. You will find they will pull out almosr completely with some coaxing from hammer( not a waffle face please ).
 
Thanks, people. I'll try straightening 'em up first and see how it fits together. Should only be a matter of months. :-) One thing I am not is patient. I figure this project will either give me some or drive me crazy.
Vic
Redlands, CA.
 
Back
Top Bottom