Non-disc oem wheels

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 23, 2006
Threads
49
Messages
710
Location
Del Boca Vista, FL
I've searched all over mud for the answer with no luck. I have an '82 40 and I just picked up a set of non-disc brake oem wheels(rivited not welded). I have been told you can run them on disc brake 40's if you use 1/4" or 1/2" spacer. I'm up for since it will give a slightly wider stance. Is there anyone out there who is or has done this? I'm running 35x12.5x15 bfg muds now so worst case I put the stock wheels on the shelf or try to sell them. I sure like those stock wheels with 33's though. I appreciate any help on this matter.
 
Well, its worth a try. I ran 1/4" aluminum spacers when I had aluminum wheels due to the thicker rim on the aluminum wheel. You just need to check and recheck your torque on the lugnuts frequently. I now have 4WDB and run disc stock wheels. I think the problem is not will the backspacing as much as it is the rivets, so spacers may or may not help. I have heard of welding the rims and removing the rivets or grinding them down.

Not much help....sorry.

Ed
 
Anyone have input? Otherwise I might have a set of powdercoated non-disc oem wheels for sale.
 
Todd - I've got a pair of 1/4" spacers on mine if you want to borrow them to do a test fit. Realistically - just stuff a couple of washers on to see test fit to see how much spacing is needed to get the rivits off the caliper - then order what you need. If it's just the skinny little 1/4" wheel spacers you can pull the studs and reinstall the longer mini truck studs to make up the diff. Have done this with the front beadlocks and no problems...

FYI - This is Bill - My 40 is over at Jim's.
 
I'll give that a try. Are you going to tellico with Jim this week? Possibility of snow it seams. Either way, it'll be cold.
 
Back
Top Bottom