New Toy

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 16, 2007
Threads
23
Messages
660
Location
Austin, TX
Got a new to me Cruiser! It's a 91 FJ80, 250k miler. I haven't seen it in person (both cruisers are in Austin, I'm in Dallas) but I hear the interior is cleaner than my old one. I bought it with a defect that you can see in one picture below. I plan to transplant my old motor, maybe the trans also in a couple of weeks. What is the easiest, both or just the motor? It will probably need paint, but I can live with it for now. The body looks to be straight, and that's what I cared about most. Here are some pics of the new one, if you haven't seen the donor I'b be happy to post pics, but I'll need a solution, I'm out of storage. :doh:
100_0214.webp
100_0217.webp
100_0221.webp
 
I thought the defect was the missing rear tailgate trim piece until I saw the giant hole in the block...hehe...good luck on your project.
 
I hope they removed a driveshaft before it was towed that way.

Does it matter with the HF2A (non-VC) transfer case as long as the center diff is unlocked? If so, why? I thought this was only a problem with the HF2AV (VC) transfer case on the FZJs. Someone enlighten me.
 
Transfer case and transmission in nuetral is how they towed it. I wasn't a long haul. I know it isn't recommended to do it that way. Do you think there was any harm done?

I feel pretty comfortable, I towed my brothers 90 Fj62 175 miles with all four on the ground with a chain. Years later we did it again the same way about the same # of miles, no ill effects to that cruiser. I know it's different with full time though. I understand the theory with autos, but how is the transmission going to get hot and cook the fluid if the transfer case is in nuetral? I won't spin at all, right? Maybe I'm wrong, and hope I'm lucky if not.:cheers:
 
I hadn't noticed the no sun roof. Man, I'm not sure if I'd miss that or not. The donor cruisers sun roof survived the roll over, maybe I'll cut me a hole:idea:
 
well the problem that most people forget when transporting A4WD vehicle is that the front hubs are usually locked in at all times, unless a conv. has been done. so when your tires rotate, you still have drive shaft movement, transmissions and differentials are designed to lubricate when they are receiving power from the tranny; you run the chance of starving crucial bearings of lubrication, especially over long distances. so it's really up to you.
 
This is true. However, I always liked varmit hunting with the roof open and spotlighting thru it. It was not optimally positioned for shooting though. The other was primarily a hunting/crappy weather rig.

I wonder how nice it would be if I moved it for the back seat hunters to shoot through? Or better yet, even farther back for the ladies while camping!:grinpimp:

Anywho, what do you guys recommend, yanking both the tranny and motor, or just the motor?
 
This is true. However, I always liked varmit hunting with the roof open and spotlighting thru it. It was not optimally positioned for shooting though. The other was primarily a hunting/crappy weather rig.

I wonder how nice it would be if I moved it for the back seat hunters to shoot through? Or better yet, even farther back for the ladies while camping!:grinpimp:

Anywho, what do you guys recommend, yanking both the tranny and motor, or just the motor?

Forget transplanting a stock moonroof in there, get a canvas slide back that runs the whole length. If I didn't already have a moon roof, that's what I'd be looking into.
 
Back
Top Bottom