New to IH8MUD

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 2, 2007
Threads
2
Messages
17
Location
Lexington, KY
Hey all,
My names Don. I bought a '92 80 this time last year and I love it. Its not my first ever 4x4 but it is by far my favorite. I have a few problems with it like low oil pressure and I am curious if any are used to this on the 3FE. Its not fall out the bottom low but the needle dosent ride where the manual says it should. Of the four increments on the gage, say 1 being the bottom and the top being 4, it rides at the bottom of two and the man. says that it should be between 3 and 4. I'm looking at changing the pump but wanted to post first to introduce myself. I'm driving my other car til I change it. I love the site and think its chock full o' info.

Thanks
 
Hey all,
My names Don. I bought a '92 80 this time last year and I love it. Its not my first ever 4x4 but it is by far my favorite. I have a few problems with it like low oil pressure and I am curious if any are used to this on the 3FE. Its not fall out the bottom low but the needle dosent ride where the manual says it should. Of the four increments on the gage, say 1 being the bottom and the top being 4, it rides at the bottom of two and the man. says that it should be between 3 and 4. I'm looking at changing the pump but wanted to post first to introduce myself. I'm driving my other car til I change it. I love the site and think its chock full o' info.

Thanks

Welcome! :flipoff2:

Also, does your oil pressure ALWAYS ride like that? And what oil are you currently using?
 
Welcome :flipoff2: to non-lurking status!

Don't R&R the oil pump just yet.

I have never driven an FJ80 or anything with the 3FE but I would suggest that you re-read the OM carefully. On the '97 (with the 1FZ-FE) the manual says the oil pressure gauge will fluctuate quite a bit from idle to cruising RPM and that dropping to your "1" mark at idle is normal.

If you don't get an answer here in the 80-section that you are happy with then check in the FJ62 section since they use the same engine.

-B-
 
Hello, i´m from Europe and i am the owner of a FJ80 like yours. First of all, excuse my poor english, this is my first post here (as you are, i am a rookie landy here, hehe).
The oil pressure gauge in my car is always just 2 mm after the second line, at 40% of scale when it is hot at normal temperature or when i drive in highway at 2500 rpm (125 kmph aprox). When car is cold, it goes between middle and the third line, maybe 65% of scale.
I am absolutely sure everything is okay, my car is 120K kilometers, no blue smoke, no oil consumption (less than half a liter after 3K kilometers).
I always use Castrol RS 10W60 fully sinthetic oil.
 
I have a few problems with it like low oil pressure and I am curious if any are used to this on the 3FE. Its not fall out the bottom low but the needle dosent ride where the manual says it should. Of the four increments on the gage, say 1 being the bottom and the top being 4, it rides at the bottom of two and the man. says that it should be between 3 and 4. I'm looking at changing the pump but wanted to post first to introduce myself. I'm driving my other car til I change it.
Thanks

Your description matches the oil pressure gauge behaviour on my since sold 91. I think I asked the same question about 3 years ago and found that the other 3FE owners were experiencing similar readings. It never caused any problems for me. Somewhere on mud there are a few threads discussing it.

Welcome to the forum.
 
This is my first subscription to any forum so I am a total newbie to posting.

Thanks for all of your input.

Well I was using 10w30 and when I thought that the pump was sick I used a thicker 20w oil. It bumped up the pressure a few hairs but thats all. I was concerned about this only because I can hear some loud valves when idleing. I first thought that the valves just needed some adjustment but then I was trying to put the two together and thought that I may be running on the dry side with low oil pressure and that was causing the noise. It needs some TLC so I'm just working through the mistery noises.

I should just list what its doing:

1) Cold natured (needs a little gas to hold idle rpm on start or it sounds weak and the instrument lights ficker on a bit as if it wants to stop)

2) valve noise (sounds like a deisel)

3) I think there must be a bit of an exaust manifold leak and thats mixed in with the valve noise.

4) It uses a small amount of oil but I'm still not sure if thats being burnt or if that it just ends up on my driveway.

5) Radiator has a hairline crack in the top that micro bubbles out coolent when its hot. its a plastic top so I have a friend that has a plastic welder and hes gonna give it a try before I get a new one. Trying to use my budget on what is most important first.

Another thing, I can't spell worth a damn and at this point I am addicted to spell check. I don't know how to use it on this forum.

Thanks
 
Another thing, I can't spell worth a damn and at this point I am addicted to spell check. I don't know how to use it on this forum.

Check your user options. It is possible that spell-check is a "silver star" privilege but check anyway. (I misspelled privilege and it underlined it in red. Rt Click, gave me the correct spelling. Also lets you add words to the dictionary.)

-B-
 
Welcome! :flipoff2:

Also, does your oil pressure ALWAYS ride like that? And what oil are you currently using?

I just figured out how to use quotes. It always runs in about the same spot. I made a mistake about the guage having 4 increments( I was going from memory) it has 3 segments. It rides just above the bottom segment at idle, at cruise it gets a hair higher and when hot it runs lowest( down in the first segment) at idle. As for the weight of the oil its 20w (30 or 40 or 50). I am currently learning what SAE convention means about oil. I admit that I am ingronant about it.

THANKS
 
As for the spell check... It appears this is a new feature of Fire Fox. You should try it if you are still using IE.

-B-
 
1) Cold natured (needs a little gas to hold idle rpm on start or it sounds weak and the instrument lights ficker on a bit as if it wants to stop)

2) valve noise (sounds like a deisel)

4) It uses a small amount of oil but I'm still not sure if thats being burnt or if that it just ends up on my driveway.

Mine is the same way for those three, seems to be fairly common with the 3FEs.
 
I'm using firefox. I dunno. I will just try to figure it out sometime.

Are you using Firefox V2.x

-B-
FF2.webp
 
Last edited:
mine rides right at the 2nd line and goes up very little at highway speeds

Do you have any type of oil leak(drops in the driveway or gasket seam wettness? I do and I would expect that from a 15yr old truck. I am wondering if thats why OP is running on the low side.

I'm just trying to get familiar with what others are experiancing. I drove it like this all year and it seems to run fine(other than the loud valve noise). I only have 158k on it and I would love to achieve the 309k that you have. I, like many I have read from on here, want to have an 80 for the rest of my life.This thing is like a rolling tent, I've slept in it many times on treks to the woods. I am 6'5 and I can actually strech out nicely with all the seats up. Just want it to last forever. I actually used dream about getting one of those Pinzguaer military trucks that have all the room inside and they can go everywhere. I kinda feel like one can achieve that with an 80 and still use it as a daily driver.
 
:eek:

"Paging Dr. Cary..."

Why something so heavy?? I don't believe we even have that here in the States; at least not readily available. Or, is it a different labeling system (metric)?

Welcome,

Curtis
91FJ80

As you know, the fisrt number is the oil properties when the engine is cold, and the second number is for the hot engine and for be used in hot places. For example, an 10W30 has the same protect properties as the 10W60 oil, except for high temperature, where the 10W60 is better than the other.
This oil isn´t heavy at all. This is the reccomended oil for BMW M5, M3, Ford Consworth, Mitsubishi Evo "n", etc.
You need high viscosity for high temp.
 
yes i have a small oil leak, i believe to be the rear arch seal, a couple drops at night no biggie if you search you will find the oil gauge reading on the 3fe seems normal, they also seem to have a bit of valve noise and im not to worried im afraid adjusted them now may do more harm then good
 
Back
Top Bottom