New Member Intro

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 2, 2007
Threads
20
Messages
274
Location
Colorado Springs, CO
Well, after lurking for about a year I decided I should introduce myself! I come from the Nissan wheeling world having owned a 95 Pathfinder and a 2000 Xterra. After watching me wheel my Nissan's for a while my dad started showing interest in the sport. So, we started searching for the ultimate offroad beast for him. I suggested the 80 series cruiser simply because it had everything that I wished I had with my Nissan's (solid front axle, more cargo space, better aftermarket support etc.).

He ended up purchasing a 93 FZJ80 about 2 years ago. After performing all the pm maintenance he began modding it. This included an OME 850/863 lift with 285X75X16 BFG AT KO's, ARB front bumper, Hanna Sliders, and Kaymar rear bumper with tire carrier. Of course I was geeked a little more about this and installed much of this equipment.

Well, fast forward a couple of years and interests and priorities changed and my dad told me he was going to put the cruiser up for sale. There was no way I was going to let this thing slip away so I sold my Xterra and purchased the cruiser. With the left over money I put a T-Max 12,500 winch in the ARB, slee upgrade harnesses, 1 1/4" coil spacers in the front, since it was open I put an ARB Rear Air locker in, transferred a lot of the electronics from the Xterra and into the Cruiser (stereo, cb etc), and purchased a Roof Top Tent. This setup has been excellent!

So far I have taken it out on some trails in Tucson such as Chiva Falls, a complete tour of the state of Colorado (including wheeling Ouray), and will be attending Surf N Turf this year!

The difference between the Xterra with lifted IFS and the Cruiser is amazing. I no longer worry about half shafts, crappy Calmini idler arm bushings, upper control arm squeeks etc! I am truly obsessed with this thing and spend way too much time lurking on Mud! My girlfriend thinks I am insane.... I look forward to contributing more to the site and meeting the many cruiserheads this year at Surf N Turf!

Pics of Xterra:
n48610558_30650165_4957.jpg

n48610558_30929676_5467.jpg

And of course the Cruiser:
n48610558_31684396_4049.jpg

n48610558_31690887_6209.jpg
 
Last edited:
n48610558_31690915_867.jpg

n48610558_31684304_9466.jpg

Thanks! :flipoff2:
 
Awesome! Welcome. Good to see another Xterra convert such as myself. Here are some pics of my old Xterra (I got rid of it this past February). 35s, Calmini t-case gears, ARB rear locker, Skid Row tire carrier, ARB Front bumper, winch, blah, blah, ;) You get the idea.

ShoeCreek10-42.jpg


ShoeCreek10-33.jpg


CO2Mount005.jpg


I'm very happy with my FJ though...it's been great on the trails and I have no regrets.

Congrats again!

Dave.
 
Awesome! Welcome. Good to see another Xterra convert such as myself. Here are some pics of my old Xterra (I got rid of it this past February). 35s, Calmini t-case gears, ARB rear locker, Skid Row tire carrier, ARB Front bumper, winch, blah, blah, ;) You get the idea.

ShoeCreek10-42.jpg


ShoeCreek10-33.jpg


CO2Mount005.jpg


I'm very happy with my FJ though...it's been great on the trails and I have no regrets.

Congrats again!

Dave.
Awesome Man! I do recognize your X from posts on XOC. I'm so pumped about working with the Landcruiser platform, there is just so much more room and possibilities.
 
Yeah, XOC....those were the days right? ;)

I recognized your Xterra as well. Good to see you here though. You're right about the LC...a much more solid and reliable vehicle and that all important solid front axle. My Xterra was on the edge of going in that direction...it's about all I could have done to it since everything else was taken care of...but I didn't feel like spending 6 to 8 grand on a solid axle swap for it. Damn, we could talk for days on Calmini issues. I had their steering system on the Xterra...enough said. Their t-case gears were awesome though, I'll give them that much.
 
Yeah, XOC....those were the days right? ;)

I recognized your Xterra as well. Good to see you here though. You're right about the LC...a much more solid and reliable vehicle and that all important solid front axle. My Xterra was on the edge of going in that direction...it's about all I could have done to it since everything else was taken care of...but I didn't feel like spending 6 to 8 grand on a solid axle swap for it. Damn, we could talk for days on Calmini issues. I had their steering system on the Xterra...enough said. Their t-case gears were awesome though, I'll give them that much.
That's crazy because those are my thoughts exactly! I actually have a Dana 44 still laying around in the garage. I decided it made more sense to just take the cruiser!
 
I like your setup on the cruiser. Especially like the roof top tent. Do you see much "squat" in the suspension with the tent up there? With people in it? Nice Cruiser!:cheers:
 
That's crazy because those are my thoughts exactly! I actually have a Dana 44 still laying around in the garage. I decided it made more sense to just take the cruiser!

Yeah, I had bought a D44 as well in January, but then decided to sell that off and get rid of the X. We had a 3rd kid just recently, so the Cruiser was a no brainer because of the interior room compared to an Xterra. An infant seat with baby, a booster seat with a 7 year old, and a 10 year old are much happier with 3 rows of seats than one bench seat in the back of an Xterra with all of the "stop touching me" "he's not leaving me alone!!!" and all the crying and fighting that goes with it ;)
 
Good choice boys.
I especially like the comment about seeling the X, buying the 80, and using the leftover $ for goodies!
Yeah, I was pretty excited when I came to the realization that I was going to have some money to spend! I actually sold off some of the offroad accessories from my Xterra as well.
I like your setup on the cruiser. Especially like the roof top tent. Do you see much "squat" in the suspension with the tent up there? With people in it? Nice Cruiser!:cheers:
The tent is actually only 100lbs, so I don't notice any "squat" from that. When I went on my Colorado trip I had the cruiser loaded up for 4 days of campin/wheelin and 4 passengers. Now, that was a lot of weight, and it was squatin with my 863's in the rear. I'm not sure I will ever have that much weight in there ever again, but i'm definately going to put a spacer back there for now...
 
Yeah, I had bought a D44 as well in January, but then decided to sell that off and get rid of the X. We had a 3rd kid just recently, so the Cruiser was a no brainer because of the interior room compared to an Xterra. An infant seat with baby, a booster seat with a 7 year old, and a 10 year old are much happier with 3 rows of seats than one bench seat in the back of an Xterra with all of the "stop touching me" "he's not leaving me alone!!!" and all the crying and fighting that goes with it ;)
HAHA too funny! I'll tell ya what Dave it's nice driving down the road and feeling in control of the vehicle! I didn't have the calmini t-case gears, but I did have their rear bumper.. Rear bumper was probably about the same build quality as that idler arm bushing:rolleyes:...
 
Some more pics..
n48610558_31817884_9063.jpg

n48610558_31817899_4018.jpg

n48610558_31817914_8698.jpg
 

Love the stance of your rig. Which 1.25 spacers did you go with?

That's a great shot BTW. Do you have a higher resolution version of that pic?

Welcome to the addiction! :flipoff2:
 
Love the stance of your rig. Which 1.25 spacers did you go with?

That's a great shot BTW. Do you have a higher resolution version of that pic?

Welcome to the addiction! :flipoff2:

I have the man-a-fre spacers in the front. Ideally I would like to either go with the Slee 4" or Frankies offroad 3.5" once I get more funds.
 
You know, I may have to consider those MAF spacers. I'm running the Slee ones right now, and I still have just a slight bit of "stinkbug" look to the 80...not much, but as you guys know it's always noticeable to the owner ;) The Slee ones I have are 1" spacers...maybe that extra 1/4" will make a bit of difference...who knows.

The stance of your rig does look great.
 
Well, to be fair I had a lot of weight in the back at the time that picture was taken. I had camping gear and food packed for four people for four days! I does sit pretty level right now with the weight out, but still maintains a little stink bug. I would like the front end to be higher when it's not loaded, but what can you do! I think I am going to start slowly putting the slee 4" together, because I think that's the only way I will be satisfied. Although, have seen people run J springs with 1" spacers up front with ome caster bushings and haven't had issues.. I guess i'd rather know I have the best thing under my truck.... blaaah blah blah blah:rolleyes:
 
That makes sense...without having a rear bumper/tire carrier set up on mine it stays pretty light in the back regularly...so perhaps I should just be happy with it and not be too damn picky about it ;)

I imagine I'll be much happier with it when I finally do get a bumper/tire carrier on the back and a bumper up front to kind of settle things down and even it all out.

For now I'm just saving the funds for the 35s and 4.88s that I'm planning to order next week...little by little I suppose.
 
HAHA too funny! I'll tell ya what Dave it's nice driving down the road and feeling in control of the vehicle! I didn't have the calmini t-case gears, but I did have their rear bumper.. Rear bumper was probably about the same build quality as that idler arm bushing:rolleyes:...

:lol: Yeah, I had heard nothing but complaints on that Calmini rear bumper/tire carrier...too many squeaks and rattles...I was very happy with the Skid Row carrier and bumper..stout as hell and not a shake out of the thing. They're no longer making that for the Xterra last I heard though. Skid Row definitely makes quality stuff..I had their full set of skids on the X as well. With all the weight on that truck, I'm sure it weighed much more than a stock Land Cruiser.

The t-case gears were a life saver in many situations and on many a rock garden...can't say enough good things about that mod...but, it's probably because Calmini didn't make them themselves and they didn't put that horrible, flaking, cheap powdercoating job on them :rolleyes::lol:

Oh well, I still get to see my old Xterra once a day...a guy in our local club bought it from me and he lives about a mile up the street from me..so I pass it every day on the way to work...at least it's still alive and in good hands.
 
Oh well, I still get to see my old Xterra once a day...a guy in our local club bought it from me and he lives about a mile up the street from me..so I pass it every day on the way to work...at least it's still alive and in good hands.
There were so many amazing memories had with that thing. It was definately hard to let it go...:crybaby:

For now I'm just saving the funds for the 35s and 4.88s that I'm planning to order next week...little by little I suppose.
You lucky bastard!:flipoff2: Are you planning on installing all of this right away?
 
Back
Top Bottom