New Birfields

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 7, 2007
Threads
19
Messages
66
Location
Anchorage, AK
I am in need of new birfields. Unfortunately, I cannot afford OEM. Longfield's are a bit too much for me also.

My rig is 1991 fj80 and I am not a hardcore off road guy, but I do use 4wd a bit.

Are there other alternatives in price without sacrificing too much quality?

Has anyone had dealings with CarPartwhse on EBAY? Do they sell crap or ????

I suspect I should just save my $$ and spring for some Longfield's.

Thanks, Dennis
 
Light duty for everyday use, will last a lot longer.
Heavy duty for hard core use, will not last as long.
 
NLXTACY is right. The guys at slee told me that their light duty aren't quite as good as OEM, but much more cost effective at 250. Their heavy duty ones are chromoly and much stronger, however the material is softer and wears quicker.
 
I'm in the same boat you are. I have a 92LC and I'm contemplating if I should go oem or aftermarket. Oem is 2-3 times the price of aftermarkets. What I did find out was that if you went aftermarket, you'd have to upgrade your drive flanges/plates to the 93-97 style, versus if you went oem, you can use your existing drive flanges/plates. I'm considering saving money so that by spring time, I can get enough to buy pair of oem birfs ( roughly $1100.00).
 
I'm in the same boat you are. I have a 92LC and I'm contemplating if I should go oem or aftermarket. Oem is 2-3 times the price of aftermarkets. What I did find out was that if you went aftermarket, you'd have to upgrade your drive flanges/plates to the 93-97 style, versus if you went oem, you can use your existing drive flanges/plates. I'm considering saving money so that by spring time, I can get enough to buy pair of oem birfs ( roughly $1100.00).

You will still need new drive plates with new OEM birfs, they are 95-97 drive plates.
 
If you absolutely need new birfs on the cheap, do some digging around and see if you can find a decent used pair with lower milage on them.

You probably won't pay any more than the cheap birfs out there, and they'll probably last as long if not longer.
 
If you absolutely need new birfs on the cheap, do some digging around and see if you can find a decent used pair with lower milage on them.

You probably won't pay any more than the cheap birfs out there, and they'll probably last as long if not longer.

That is probably true if you know you are not getting used cheap birfs.
 
You will still need new drive plates with new OEM birfs, they are 95-97 drive plates.
My bad, I know that. I did indeed get new drive plates. But the point I was trying to make was that the old style drive plates will not work with the newer style birfs.
 
My rig is 1991 fj80 and I am not a hardcore off road guy, but I do use 4wd a bit.

Unless yours is a non-US spec vehicle or you have retrofitted a PT kit, you use 4wd every time you drive the truck. It is a FT 4wd vehicle and therefore the birfs are "used" whenever the front wheels are rolling.

-B-
 
I would go the used route. I have seen good deals out there, you just have to look around.
 
Back
Top Bottom