New 80 owner

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 9, 2016
Threads
3
Messages
21
Location
Issaquah, WA
Just bought my first 80 today. Thanks to all the great reading I did on ih8mud the purchase was a breeze.

Good Details:
$1200 for a 1994 in Green with tan leather interior. 116,500 miles. The first 100,000 were in Palo Alto CA which mean little to no rust. Everything stock. All electrics work. Perfect condition second and third rows.

Bad details:
The front seat bottom are rough (the backs somehow are in great shape). The is a leak pooling in the driverside floorboard. This will be my first project to get fixed. The front passenger door has damage from sideswiping a parked car. The fender was replaced but is the wrong color. The rear passenger side fender flare is cracked. Missing right front corner turn indicator housing. Driver side front and rear windows don't raise or lower (motors are both making sounds when the switches are operated).

This is going to be our family camp and mountain bike wagon. Mods will be new suspension all around and a roof rack and light. Probably a front bumper and winch for fun.

I look forward to the slow and steady progress I get to have with my LC. This is a third vehicle for us so I can take it apart and play with it anytime. No daily driver here.

Thanks for checking it out. More and better pics soon. (This is a Craigslist photo from its good side)

image.webp
 
Good find!

As you read here, you'll find low mileage rigs require just as much maintenance as high mileage rigs. Essentially, everything rubber is shot. Windows not working is typical 80 series. Clean the runs and put lavish amounts of silicone grease on them, then see what you have.

But everything you mention is easily repairable/replaceable.
 
At that price you can't go wrong.

Congrats
 
Welcome and congrats on your 80. Take the maintenance slow and steady and you'll get it back in great shape.
 
Thanks all for the welcome. It's been a busy few weeks but I squeezed in few hours of LC time. Here is where I am so far:

Topped off all fluids. The parking brake needed adjusting and it was very low on brake fluid. Now the cruise control stays on because the pesky dash light stays off! Fixed two wobbly side mirrors (thanks to some very detailed post here on mud). Cleaned the sun roof drains and the underbody drains. I had to pull the plug under the driver side electric run to get the water out of that carpet. Everything dried up nicely. Full clean on all carpet, leather, vinyl. The rear sliding windows slide again! Replaced the missing right side corner light (aftermarket Depo).

Next is a deeper look at all fluids, bearing, etc. The old baseline as it seems to be called.

I have one need from someone please. The LC has no front washer spray heads. When they replaced the hood they did not replace those. Can someone post up some pics and measurements so I can get a set installed. I found some OEM heads and want to make sure I put them in the ideal location. Thanks

PDF
 
Thanks all for the welcome. It's been a busy few weeks but I squeezed in few hours of LC time. Here is where I am so far:

Topped off all fluids. The parking brake needed adjusting and it was very low on brake fluid. Now the cruise control stays on because the pesky dash light stays off! Fixed two wobbly side mirrors (thanks to some very detailed post here on mud). Cleaned the sun roof drains and the underbody drains. I had to pull the plug under the driver side electric run to get the water out of that carpet. Everything dried up nicely. Full clean on all carpet, leather, vinyl. The rear sliding windows slide again! Replaced the missing right side corner light (aftermarket Depo).

Next is a deeper look at all fluids, bearing, etc. The old baseline as it seems to be called.

I have one need from someone please. The LC has no front washer spray heads. When they replaced the hood they did not replace those. Can someone post up some pics and measurements so I can get a set installed. I found some OEM heads and want to make sure I put them in the ideal location. Thanks

PDF
 
Fixed the two DS windows today. Turns out they were both off the tracks. Cleaned, lubed, reinstalled. Now they are all good! I am going to start checking all fluids next week.

image.webp
 
It is brown leather. All of it is in great shape save the front seat bottoms. One more project to get checked off.
 
Fixed the two DS windows today. Turns out they were both off the tracks. Cleaned, lubed, reinstalled. Now they are all good! I am going to start checking all fluids next week.

View attachment 1250266

My 2nd row Windows won't go back up once you open them on both sides. Was that your original issue before opening up the panels? I want to try and fix it myself... Thanks!
 
I could here the window motors working but neither window moved. The front window looked normal, the rear had some tape along the top edge holding it up. The bottom window tracks were detached from both the window glass and the motor, just sitting at the bottom inside the door. While I was in there I cleaned and lubed everything. The driver side has a little stutter when raising so might lube the window run itself with a little silicone to try to help that. Hope that helps. I am a mechanically inclined car noob (have built guitars, construction, furniture building, etc). With the FSM pdf I found I was able to do both windows in about 4 hours.

PATRICK
 
I could here the window motors working but neither window moved. The front window looked normal, the rear had some tape along the top edge holding it up. The bottom window tracks were detached from both the window glass and the motor, just sitting at the bottom inside the door. While I was in there I cleaned and lubed everything. The driver side has a little stutter when raising so might lube the window run itself with a little silicone to try to help that. Hope that helps. I am a mechanically inclined car noob (have built guitars, construction, furniture building, etc). With the FSM pdf I found I was able to do both windows in about 4 hours.

PATRICK
I could here the window motors working but neither window moved. The front window looked normal, the rear had some tape along the top edge holding it up. The bottom window tracks were detached from both the window glass and the motor, just sitting at the bottom inside the door. While I was in there I cleaned and lubed everything. The driver side has a little stutter when raising so might lube the window run itself with a little silicone to try to help that. Hope that helps. I am a mechanically inclined car noob (have built guitars, construction, furniture building, etc). With the FSM pdf I found I was able to do both windows in about 4 hours.

PATRICK

How were you able to put the water barrier back on? Glued it or tape?
 
How were you able to put the water barrier back on? Glued it or tape?
I used RTV sealant with heavy plastic sheeting I had. If you look at the photo I posted you can see the cut outs I made to access the tracks, bolts, etc. I RTVed around those cutout and put on patches of plastic cut to suit. Hope that makes sense.
 
I used RTV sealant with heavy plastic sheeting I had. If you look at the photo I posted you can see the cut outs I made to access the tracks, bolts, etc. I RTVed around those cutout and put on patches of plastic cut to suit. Hope that makes sense.

Thanks for your help!
 
Back
Top Bottom