Need PS Front Door Shell

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 29, 2007
Threads
20
Messages
192
Location
Vancouver, BC
Hi guys,
Do you think I could find a used PS front door shell for my '97 80?
I got an accident couple weeks ago, still could not find a decent one.

Thanks,
James
JMZ-
 
go into the mud classifieds and see if there are any being parted out.

There was a jdm 80 being parted out in BC. Not sure if there is doors still.

Don't buy a shell, buy a door used.

I'm sure in Washington state you could find a used door too. Also try all the wreakers to see if there are any doors available.

Pine Dale auto wreakers in PG had an 80 sitting there, but I am sure there is one further south.
 
I've got a PS door shell with damaged on the piece that goes around the top and sides of the door glass. The sheet metal is is fine though
$80 as is, ready to go

a complete door would be nicer!!!!!
 
a complete door would be nicer!!!!!

As you know cruiser skins are soo tough it's darn hard to remove them. I opened my seams on my 60 series doors on the bottom to give them a bead blast and POr-15 then re-sealed them. Waay too much work. But since all the seams are bare I feel it is worth it on a cruiser you want to make last.
 
Guys, thanks for the infor. I know the complete door would be the best solution. Well, I still want the cheaper way and the other parts of my door are fine. I found one in NH but the shipping is too much.

Mud_Guppie,
What's the year of your door? Got any pics?
Or maybe I will stop by your shop sometime next week.

Thanks.
 
Back
Top Bottom