Need help with power mirror switch

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 24, 2019
Threads
20
Messages
87
Location
OHIO
I've had my '97 FJ80 for several months now, and love it. I've wanted one for a long time, and finally found a good truck and have been working through some quirks/issues. one of those is the power mirror switch - and I'm hoping someone on here can give some input to the issue. Neither of the power mirrors adjust and I'm not sure exactly what to look for. I purchased another switch off of ebay to test the switch, and it didn't change the outcome, though I guess I could have bought a bad switch. Could it be bad motors in both mirrors? I've traced the wiring back to see if anything looks hacked, and all looks to be in tact with no splicing of wires or anything like that. Ideas?

Thanks,
Andy
 
1990-1997 Toyota Land Cruiser 80 Fuse Box Diagram » Fuse Diagram

Before buying any replacement parts for any electrical issue its best to start with the basics. Without any tools needed to initially check this, open up the fuse compartment and check fuse number 1 (15A: Cigarette lighter, power rear view mirrors, digital clock display, radio, cassette tape player, power antenna, automatic transmission shift lock system, SRS airbag system). Ensure this fuse is present & not blown. The next thing is to ensure all connections are actually plugged in. Any time the dash is removed or a mirror has been removed, its quite possible to unplug one of those connections and not plug it back in. If you have a volt meter the next step is checking wires for power, its quite unlikely both motors of the mirrors have gone out, but it is a possibility. With nearly all electronics, motors are usually one of the last things you want to replace. If you truly think it is one of the motors, you should be able to remove it, attach a new 9v battery and actuate the motor. If my FSM was in hand I could be of more help, but these are just initial thought.

20130331_161028 (Medium).webp
 
1990-1997 Toyota Land Cruiser 80 Fuse Box Diagram » Fuse Diagram

Before buying any replacement parts for any electrical issue its best to start with the basics. Without any tools needed to initially check this, open up the fuse compartment and check fuse number 1 (15A: Cigarette lighter, power rear view mirrors, digital clock display, radio, cassette tape player, power antenna, automatic transmission shift lock system, SRS airbag system). Ensure this fuse is present & not blown. The next thing is to ensure all connections are actually plugged in. Any time the dash is removed or a mirror has been removed, its quite possible to unplug one of those connections and not plug it back in. If you have a volt meter the next step is checking wires for power, its quite unlikely both motors of the mirrors have gone out, but it is a possibility. With nearly all electronics, motors are usually one of the last things you want to replace. If you truly think it is one of the motors, you should be able to remove it, attach a new 9v battery and actuate the motor. If my FSM was in hand I could be of more help, but these are just initial thought.

View attachment 1893759

I'll be honest, I haven't checked the fuse, but considering the radio, clock and power antenna are all functioning just fine, I'm assuming it isn't the fuse. Can someone clue me in to where all the connections are at for the mirrors and I can at least start there and verify that everythign is plugged in correctly?

-Andy
 
I'll be honest, I haven't checked the fuse, but considering the radio, clock and power antenna are all functioning just fine, I'm assuming it isn't the fuse. Can someone clue me in to where all the connections are at for the mirrors and I can at least start there and verify that everythign is plugged in correctly?

-Andy
Here a video series showing you exactly how to remove the mirror: How To Install Clearview Towing Mirrors On Toyota Land Cruiser 80 Series 1990 - 1997

Here is the more important diagram for troubleshooting (Can't 100% guarantee this is correct because I'm not in-front of my manual, but other FZJ80 users have referenced this in other forums):

32515-01841b71eddbc5dfbb4dafe6d5adf552.webp
 
Stupid question.......

Did you flick the slider switch to point to the side you wanted to move, then move the adjusters? hen flick the switch to the OTHER side and do the same? There is a detent in the middle as a neutral position that neither side will activate.....
 
Stupid question.......

Did you flick the slider switch to point to the side you wanted to move, then move the adjusters? hen flick the switch to the OTHER side and do the same? There is a detent in the middle as a neutral position that neither side will activate.....

Yes, I have slide the switch numerous times, doesn't do a thing, I don't hear either motor.
 
Back
Top Bottom