Need Help--What Are These?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 16, 2016
Threads
18
Messages
46
Location
Gainesville
This is a photo taken looking towards the front of the LC on the passenger side. These pipes were behind a couple of heat shields above the exhaust and are essentially under the passenger seat. I decided to remove the heat shields and see what was leaking. The fluid they are leaking doesn't really have a smell.

Anyway, I wanted to replace them, but don't really know what they go to. Any part numbers, etc would be helpful. Thanks in advance.

GC

IMG_0809.webp
 
Rear heater lines. They provide coolant to the heater core under the passenger seat.
 
Rear Heat lines. Sorry I don't have part numbers for those and I doubt you can still buy brand new ones from Toyota.
Some members have successfully deleted rear heat. You might be able to partially cut those bends and purchase 2 "L" heater hoses.
 
Easy to make that tubing, if you need it.
 
Has anyone ran hose all the way up to the firewall?
I did that on my FJ55. It's probably about the same. Copper tubing might work too.
 
Thanks again. There are always so many people here willing to help!

Glad to hear I should be able to make these. Does anyone know the tubing size? Also, will copper somehow react with the coolant? Was going to go the copper route, since it should be relatively easy to make, or would it be just as easy to use regular tubing? Will a lot of coolant leak when I take these apart or just what is in the core?

Thanks.

GC
 
Forget my last post! Found multiple threads on this problem and answers to my questions. Still don't know about the copper/coolant question though? Thanks again for the help!!
 
Back
Top Bottom