Need Help on Alarm Troubleshooting

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 30, 2008
Threads
38
Messages
91
Location
Central NJ
All- I'm a newbie with a 96 80 that I got a great deal on but has some minor issues to resolve. One of them I'm working on this weekend is the alarm. It had an aftermarket unit that I didn't like because it did not signal when armed, did not turn interior lights on, had a worn transmitter, yada, yada, yada. Yes, I read all the complaints about the port installed system but I am a purist and wanted the alarm Toyota wanted with all its good features and bad. Searched forum thoroughly to learn all I could about the RS3000, downloaded the documentation (thanks Slee and Beowolf), got a new fob, and went to work pulling out old aftermarket alarm. Glad I did as it was not a very clean installation. Put RS3000 back together although it was 99% there, checked that it was installed correctly, checked all the programming, and I am close. Unit works as expected with two exceptions: doors don't lock/unlock and the piezo unit does not sound. Not too worried about the latter; I'll ring that out tomorrow. However the locking/unlocking is an issue. Searched the forum again but only came up with one specific check and that was someone who noted their alarm did not lock/unlock after getting Toyota service and later found a "slide switch" by the lower gate that once changed, fixed the problem. Don't know what he was referring to so PM'd for details. Anybody know what this is? So, a few other questions: Any straightforward things to check? Does anyone have RS3000 wiring diagram or troubleshooting guide if they do exist? (Not on Slee web site; they are for RS3200) Do I dare take it to Toyota? Not sure they would have a clue as it is not addressed in service manual. Any advise would be appreciated as I attack this tomorrow.
 
Last edited:
Back
Top Bottom