Need help on a lift

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 27, 2007
Threads
18
Messages
134
I just got a 1991 fj80 and want to add bigger tires and a lift to it. I am wanting to run 35's if possible with as big as lift as possible without haveing to modify a great deal of things, such as driveshafts, gears, etc. I am thinking a 3" lift would do what i want. I see that the springs are ~300 a set, and the castor correction bushings are ~100. is this all i need besides shocks? i want to spend around a $1000 total on lift and tires. I got a price of $550 for 35x12.50x15 bf goodrich m/t's, mounted and balanced with road hazard protection, so that leaves ~500 for the lift. so springs and bushings are $400 and i will probably need some more money on the shocks. but is this all i need and will the 2.5"-3.5" springs clear the 35's and allow me to have articulation offroad? which ome springs do i need? i have stock bumpers and maybe 100 pounds in the back
 
Take a look at some of the kits and see what's included. You're going to need to extend your brake lines, e-brake cable bracket, sway bar mounts, and bump stops off the top of my head. You can fabricate most things. The kits usually cost less than the sum of the parts, so you must be missing a few things if you're only accounting for about half the cost of the kit. Also, where did you find those tires? :D Costco wants a grand for 4.

-Spike
 
well looking at the ome kit, it is 4 springs,4 shocks, a steering damper, and the bushings. their cost is ~800 ,The springs and bushings is $400 , so the other ~400 is for shocks and a steering damper? The say there kit is complete but mention nothing abotu brake lines, e-brake, sway bar,etc?
 
well looking at the ome kit, it is 4 springs,4 shocks, a steering damper, and the bushings. their cost is ~800 ,The springs and bushings is $400 , so the other ~400 is for shocks and a steering damper? The say there kit is complete but mention nothing abotu brake lines, e-brake, sway bar,etc?

x2. I found that even with the true 2.5" lift I got with my OME lift, brake lines are a little short, and a couple of cables needed to be slightly relocated.

I hesitate to even call it a "lift kit"; all it is is springs and shocks. IMO a "kit" should include everything required for the lift, such as LPV bracket, caster bushings, extended brake lines, etc, etc, etc.

I think back to the Superlift kit for my old IFS 4Runner; it had like 20+ components!
 
i want to go with a 4" lift with 35" tires if possible without too much modification. if i run a 4" lift with slees castor plates and the matching shocks i need will this be all i need(along with some fender trimming)? it seems that combination would correct my castor, but how about driveline vibes? would a diff drop take care of that?
 
i looked over the article but it only helps me to an extent. all the cruisers mentions have front/rear bumpers, winches, etc. i am stock except a damage multiplier on the front. I guess i'll just have to get the stuff and try it. which springs do i need to do a 3.5-4" lift unloaded?
 
You will have to do some trimming in the rear at full articulation!

Get the heavy springs in the front, mediums in the rear, your castor correction . Shocks and you will be find!

brake lines can come later!
 
You will have to do some trimming in the rear at full articulation!

Get the heavy springs in the front, mediums in the rear, your castor correction . Shocks and you will be find!

brake lines can come later!

850's in the front and 863's in the back? will this be around 4" unloaded? if i add the arb bumper later, will a 1" spacer correct the lift? thanks for the help
 
tigertown---

you should also look at the J springs if you really want to clear 35's under full articulation. Some of you answers depend on how much you are willing to trim, if a little rub is ok, if you have and wish to keep your flares on your rig.

you could also look at the FOR kit to clear 35's , im not sure of the price though
http://frankies4x4.com/Home_Page.php

you will have a hard time finding a diff drop for an 80 though :D but it looks like you scored on the tires, is it a chain, did he oops, that setup is usually 1k +/-

if you are maxing out your articulation you may not want to wait on the brake lines, its a small price to pay to be able to stop 6000lbs of truck; i have seen non extended lines pull loose under full flex. you could modify the bracket however. lots of info in the FAQ lift section.

whats the name all about? clemson, LSU, other

oh and welcome aboard :flipoff2:
 
i am worried that with j springs i will have problems with driveshafts and such, i have heard they are a 4.5" + lift without any bumpers or extra weight. frankies kit is only 3.5" and says it clears 35's. Just need to know which ome springs i would need for around a 3.5"-4" lift unloaded. i want to keep the flares but i am willing to trim as much as i need to. that diff drop i saw was for a 100 series ;( the name is about clemson,
 
tigertown---



:D but it looks like you scored on the tires, is it a chain, did he oops, that setup is usually 1k +/-

:flipoff2:

tires are 35x112.50x15 bf goodrich mud terrains , employee discount plus there is an employee day only coming up where i get another 10% off my discount. i can get the goodyear mtr's for 200 more. :flipoff2:
 
tires are 35x112.50x15 bf goodrich mud terrains , employee discount plus there is an employee day only coming up where i get another 10% off my discount. i can get the goodyear mtr's for 200 more. :flipoff2:

From what I've seen stick with the BFG MTs and forget about the MTRs.

As for the lift etc. and staying under $1000 total...It will be interesting to see if you are able to do it. IIRC if you stay in the 2-2.5" range you should be ok on the brake lines and by relocating the LSPV. Over that is when you start into DS problems etc.

The other issue with jumping up to 35s is gearing. Has nothing to do with lift size but has everything to do with tire size. Even Nay finally concluded that if you go up to 35s regearing is a necessity. Even more so for you IMHO with the 3FE.

Maybe a better approach, for now, is to go with 33s (285s), OME medium lift, and call it good. Or bite the $$ bullet and do it right from the beginning to fit 35s.
 
Diff drops are for IFS trucks. It's a bit difficult to drop the diff on a solid axle, and less than desireable to do so if it were possible.

-Spike
 
Back
Top Bottom