Need Help. Catalytic Converter bad

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 15, 2005
Threads
15
Messages
96
Location
Iowa
I have a 1991 Land Cruiser
Well I took my truck in today because exhaust was getting loud. Appearently the Catalytic Converter is bad or has hole in it.
He said none of their outlets have that Catalytic Converter for that truck. He said he'd have to get it from factory and it'd be like $1000 or so.
So I asked him if I could find one cheaper that fits/works if they'd install it. He was said they normally don't, but since their outlet doesn't carry it he would and just charge me labor.

So my question is. I found a page autopartswarehouse.com for the 1991 Landcruiser Catalytic Converters.
Will anyone of those work? Are some better than others? I would like to buy the cheapest one of course.
Here is the Link to the page.
How about the 2nd one down? The Eastern brand that is $117.95?
Or even the cheap one's that are $51.95 and $74.14?

Are they all pretty much the same? Sorry if these are stupid noob questions.
Or does anyone know anywhere else to buy one that is cheap or cheaper?

Thank you very much for the help.
 
It's on the drivers side. That's about all I know.
I'm not sure if I'm getting one with the Y pipe or not or if it even needs it.
Do I need the ones with the long pipe attached to it? Or can I just by the converter? Or does it matter where the hole is? I'll go out and look when I get a chance. Thanks
 
It's on the drivers side. That's about all I know.
I'm not sure if I'm getting one with the Y pipe or not or if it even needs it.
Do I need the ones with the long pipe attached to it? Or can I just by the converter? Or does it matter where the hole is? I'll go out and look when I get a chance. Thanks

I looked at your link and some of them were direct fit, aka bolt on and others were universal which means that you may have to weld or do whatever is necessary to get it to fit. When I was reffering to the cat on the Y pipe, I was speaking with reference to my 1997. Yours may be a little different. Sorry if I caused any confusion.
 
Thank you much John for your help.
I'll probably end up buying one of the cheaper direct fit ones and take it in to garage and see if that'll work. I really don't have $1000 to buy a new one from factory.
Thanks again John. :cheers:
Would have been nice if someone else rang in with some advice. But I can't expect everyone to be courteous on an online forum. :grinpimp:
 
Mine is a 1997 year model- I had a local place weld in a universal (hi flow) aftermarket cat. It works great- no more computer codes showing up anymore and seemed to give it a minor boost of horsepower also. The cost of the cat. was approximately $125 and they charged about $80 to weld it on.

The good thing about the newer aftermarket ones is you will have more ground clearance also.

Hope this helps!

Rick :grinpimp:
 
Would have been nice if someone else rang in with some advice. But I can't expect everyone to be courteous on an online forum. :grinpimp:

??

do a search for "catalytic" and you will find lots of options - I just took mine to a local exhaust shop and had them put in a new magnaflow cat. On mine they used a dual in single out for a dodge truck with a new 2.5" pipe back to a magnaflow muffler and turned it out behind the tire. It was $400 for everything. I have seen others with similar solutions - look under Land Speeders ROTW - he had a y pipe welded in behind the O2 sensors and added a single cat. I actually had to show the guy at the exhaust shop a picture of his before he would do it.

The key is to go to a local place (read not Midas, Meineke, etc.)
 
lol...yeah I was just messing around, but you're absolutely right. I should have used search. I just like the communication between real people more than reading old posts. Thank you much for advice guys
:beer: :cheers:
 
Quick question. I looked through search and found some information, but couldn't find anything about Land Speeders ROTW.
I think it's Dual in and looks like a Y pipe out inside the shield, but looks like single out outside of shield. But all the one's I look at are single in, single out. So how would that work? Are there 2 separate Cats under that heatshield or whatever kind of shield it is?
I found a/the Magnaflow here.
Was going to order it this weekend and see if that's all they'll need. But again not sure since looks like in is 2 pipes and out is 2 pipes to Y.
Thanks again for help.

Here's pictures of mine
Front Side view - Red circle is where there's a little hole, which is where I thought noise was coming from, was hoping they could patch it. But he said Cat is bad. It's a '91 so I figured replacing the Cat might not be a bad idea (If it's cheap enough) even if it was just a hole. Blue circle is there cause I wasn't sure if that was a hole or what.
100_4966.jpg


Back Side View
100_4967.jpg


Back View of the Back of Cat. with the Y pipe.
100_4968.jpg
 
So that O2 sensor mount, is that where I have the blue circle at? So that IS supposed to be connected to that? Well atleast they are only about $25 (before shipped).
Was thinking of taking it somewhere else and seeing if they could just fabricate a piece on there for me and do a little patch job. Or would I just be better off replacing anyways?
Thanks again
 
Take it somewhere else. This guy is trying to take you for a ride...

Are you setting any codes ? If not I doubt your cat is bad. Take it to another exhaust shop, have them replace your O2 sensor / mount and have them weld up your leak(s)...
 
I'm not sure if I'm getting any codes. Not sure how to check that. Do I just take to like autozone or something? It's just kinda loud when I accelerate. Not too bad when I'm idle, but you can still hear it.
Was thinking about taking it to their other shop on other side of town to see if they'd say the same thing.
Thanks for help and advice. I'll take it around acouple other places this week and see what they say.
 
Another quick question..or two.
Was going to get the magnaflow cat, but I see I have 2 cats.
Is it ok to run those pipes to 1 cat? Do I need 2 cats? Also do I really need the o2 sensors and if I don't use will they cause a problem?
I noticed my state doesn't have an emissions law so I don't think I'd have to buy OEM cat(s).
 
Another quick question..or two.
Was going to get the magnaflow cat, but I see I have 2 cats.
Is it ok to run those pipes to 1 cat? Do I need 2 cats? Also do I really need the o2 sensors and if I don't use will they cause a problem?
I noticed my state doesn't have an emissions law so I don't think I'd have to buy OEM cat(s).

Keep the O2s (get new ones and your truck will run better and get better gas mileage) and as for the cat 2 to one would be fine .
Im running a set of the discountconverters com bolt on ones on my my 92 and they have been great and at the same time I changed the o2s and got about 4mpgs more per gallon on the highway.
 
even in California they don't care about OEM cats. just do it
 
Well finally got some money. Was going to order a magnaflow, 2 O2 Sensors, and 2 O2 sensor mounts and see if I could find some place around here to install for decent price.
With the O2 sensor, does it have to be 4 wire if I'm getting a universal? Might just buy a direct fit if I can find one cheap enough.
Do I really need 2 sensors if I'm running to 1 cat.? Would there be a disadvantage with just one? Would the cpu or whatever not beable to process the information correctly and mess up my mpg or some crazy s***?
 
Last edited:
Back
Top Bottom