Need a measurement

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 21, 2004
Threads
73
Messages
597
Location
The Rockies or the Andes
What is the distance from the top of the frame to the bottom of the floor at the factory crossmember on a 40? basically i need to know how far above the frame my new crossmember can be without hitting. :cheers:
 
This is going to be relative to the size of tire and lift that any vehicle has….


It will not be the same for a truck with stock tires and suspension, compared to one with 33’s and a 4” lift plus longer shackles.
 
No, without a body lift it should be the same. i.e. the tub sits on body mounts that space the tub a certain distance from the frame. I want to know the distance (stock) from the top of the frame rail to the bottom of the floor of the tub at the point where the stock bent crossmember at the transfer case intersects the frame rails. Its like 3 seconds with a tape measure but you must have a tub on the frame which i don't.
 
gdtrfb said:
you mean the round one? Ive got about 4.75" to the center of it
see pic
cross.webp
 
Back
Top Bottom