Mystery 40 Interior

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 30, 2005
Threads
43
Messages
581
Location
Brevard, NC
Website
mofj40-1968.tripod.com
Continuation from Another New Member thread.


I've attached a pic of the 4x4 actuator (for those just joining,this is supposedly a 74 fj40, but has an interesting array of multiple year parts- see Another New Member for background).

The pull switches directly above the heater are the 4x4 and the cowl vent- 4x4 on the left, marked FD (front driveshaft?)- pull to engage, vacuum actuated. Cowl vent is marked by 3 wavy lines, push to open, mechanical linkage.

The lever to the left of the 4x4 is the low range selector- pull towards driver to engage. To the left of it up against the firewall, you can see the Mr Gasket fuseblock. I have another bolted to the drivers fenderwell in the engine compartment. I haven't had time to trace out all the wire runs yet.

Attachement question- I've got more pics of the interior, but am out of my allowed attachment storage space. If I delete an attachment using the Manage Attachments screen, will that delete it from the post it's attached to, or will it just be unable to be used in new posts until I upload it again?

If need be, I can post them offsite and link, but it's easier to refer to them if they are with the post.

Thanks for any info, guesses, comments, etc.
 
Last edited:
If you remove the attachment it'll kill the image in threads. You can put pictures offsite and link or.............drum roll, please,,,,,,,,,,,you COULD buy a silver star which will uncap the number of images you may attach, open up your p mail greatly, and make you a better person in the eyes of your choice of diety. :), including the Almighty Woody.
 
In your other thread if you parked our cruisers next to each other they would be twins. I have a Jan 71, your interior is identical as well. Not sure how long they ran production of the 71 version. Although mine has the 60/40 split bench with three back rests, which is supposed to be later than 71 so who knows.

Les
 
quick question....does your frame stamped VIN (right horn, side of frame, below tow hook) match the riveted tags and the title?

I'll wager they don't....that frame horn number may enlighten you to the true model year....


your attachment box will enlarge some after 10 posts...and become unlimited should you opt for the Silver Star.

"memberships" on 'MUD are in 4-5 stages....1 is new, which is 10-less....2 is full registered, which is 10-unlimited....Silver Star which is $20....Gold Star which is for those who have made "above and beyond" donations (ie: sold my truck on here, here's 1% as a thanks...etc)...and vendors, which include banner ads and such.
 
In your other thread if you parked our cruisers next to each other they would be twins. I have a Jan 71,

do you have the small lights in your bib? I have a feb 1971 and I don't ?
 
nuclearlemon said:
bib lights ended around 68


My 69 has them but it is early 69 (old style oil filter) do not know if later ones had them.
 
Rinbow star ??????
 
Thanks for the info so far! I'm sure I'll get a membership eventually, but I've got my first kid on the way (Feb), and already the doc's turning the screws. In the meantime, I went cheap (aka free).


Here's a link to all the photos I have thus far:

http://groups.msn.com/FranklinPhotos/landcruiser.msnw?Page=1

Let me try and answer the questions already posted, and then I've got a few more.

Yes, it has bib marker lights.

I tried looking for the frame number real quick, but no luck. If someone can give me a more detailed (think 3rd grade, it's been a loonng day) description of where to look, I'll search again. Title matches door plate, but this is Missouri- what you see is what it is according to dmv. They almost certainly went off the door plate and didn't look further.

I noticed today that I have threaded, reinforced holes in the top, inside, one on each side about 6 inches back from the B pillar. They look sturdy enough for shoulder harness mounts? When I bought the truck, it had no belts, so I added salvage yard lap belts.

The ignition switch is on the dash to the left of the steering wheel. What year did it move to the column?

On the outside of the windshield frame on both passenger and driver sides, I have threaded holes (2 each side) spaced vertically about 3 inches apart. Anyone have a clue what these are for?

Driver side fender has 1/2 inch hole directly above the kick vent. ?????

Passenger side fender has 1 inch hole directly above kick vent. Radio antenna???
 
Frame number- Right front frame horn. May need a wire brush/wheel to see it....


top may be a later year...no biggie


09/72 was when ignition switch left the dash and went to the column..


windshield frame...someone probably had light brackets on there at one time...don't put them back on.


People drill holes in things all the time....
 
Frame #
Above and left of the shackle. Forward of the right front tire.
number.webp
 
No bib lights

froggy said:
do you have the small lights in your bib? I have a feb 1971 and I don't ?

Yep, mine doesn't have bib lights, I do have the spare tire setup you have mounted on the passenger side like you, as well as most of your other stuff. Like I said mine is a fairly unbutcherd jan 71 but there are at least some 72 parts in it. I was told they would use 71 parts on a 72 while they still had some left over. Wait till you get into wiring if it is stock. Mine has what looks like wiring from pre 71 mixed with some newer and I know I opened some of the loom for the first time. Good luck.

Les
 
mofj40....FLIP your BEZEL!!!
 
Yeah, the horn is the premium efficiency space/time saving unit. In Missouri, you have to have a horn to pass inspection. They do not specify type, volume, or installation permanence.


To all bezel posters- That pic is about a week old. In the last week, I have been verbally flogged enough to convince me that my reverse bezel is blasphemous. The bezel will be turned, the demons exorcised, and all will be well. Actually I hadn't even noticed, but now I notice it every time I look.

I'll look again for the frame number. The frame paint is really thick, so it's probably just buried.
 
Back
Top Bottom