my rear storage box

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 3, 2008
Threads
60
Messages
623
Location
pensacola florida
a while back I was looking for ideas on how to desingn my storage box and I found a storage box that "Charleston" made and I liked the design of it so I decided to make one, when my seats are folded down it allows me to put a queen size air matress in it and it is completly flat it has two 30 inch deep drawers, one side is a Range Rover recovery side and the other is for the air matress and a pump, and a back hatch style box for hunting equiptment(guns ect...), I also added some "wings" on the side to make everything flush in the back, I used 3/4 inch 5 ply pine for the top and bottom and I used half inch birch wood for the sides and the drawers, for the slides on the drawers I used ones that were rated at 100 pounds and are 24 inches, and for the wings and back hatch I used 1.5 inch piano hinges down the whole thing, and added many L brackets to add stength to the box, and I carpeted it with some outdoors carpet I found that match the carpet in my cruiser, rather than using staples to hold the carpet in place I strongly suggest using contact cement, its harder to work with but I feel it will be alot better and more durable in the long run,(tip..contact cement is not very forgiving), anyhow here are some finish pics

Kodakgallery.com storage box
 
it weighs if I had to guess about 100 at the most
 
Looks awesome! I love the "Range Rover Recovery Section"! :cool: If I may ask about them what are those things that are hanging high to the liner? Fly rod fixtures perhaps? Again looks awesome. :cheers:
 
now those are DRAWERS! you can put kids to sleep in those, nice job! got more pics?! +1 on contact cement, i think it's standard for boomboxes as well with speaker carpet which is what i plan for mine...i like how you put the hinge down first and carpeted over, i initially thought of just puttin my hinges over the carpet but your job looks nice and clean....hmm...

so yeah, shot of everything flat with mattress, por favor!

so did you still use staples at the end of the carpet or is it just all held down by contact cement? any paint used for any part??

thanks for sharing.
 
oh, those are my fishing rod holders I made, they look horrible but it keeps em off of my leather, you just buckle them in and I tied a rope in the middle seat with some clips to hold th tips from flopping around
 
now those are DRAWERS! you can put kids to sleep in those, nice job! got more pics?! +1 on contact cement, i think it's standard for boomboxes as well with speaker carpet which is what i plan for mine...i like how you put the hinge down first and carpeted over, i initially thought of just puttin my hinges over the carpet but your job looks nice and clean....hmm...

so yeah, shot of everything flat with mattress, por favor!

so did you still use staples at the end of the carpet or is it just all held down by contact cement? any paint used for any part??

thanks for sharing.


I loned out my air matress but when I get it back I will snap a shot, yes I used a few staples on the ends just for added strength, I didnt use paint although I did varnish the entire thing for water protection

thanks for the complements guys
 
oh, those are my fishing rod holders I made, they look horrible but it keeps em off of my leather, you just buckle them in and I tied a rope in the middle seat with some clips to hold th tips from flopping around

They don't look too terrible to me, they're really rather functional looking; I've always got my rods either rubbing my ear as I drive or rattling my windows as I drive, something like that would make things much better. As strange as it sounds I don't like strapping them to the roof rack especially in winter weather when I fly-fish the local rivers; they just get so ratty riding up there. Anyways, :cheers::cheers::cheers:
 
oh, those are my fishing rod holders I made, they look horrible but it keeps em off of my leather, you just buckle them in and I tied a rope in the middle seat with some clips to hold th tips from flopping around

Can we get a closer look at those rod holders?
 
Can we get a closer look at those rod holders?

yes, in the back their is a PVC pipe zip tied to the 3rd row "OH sh#t" handles, and on that PVC pipe their are 5 cable cuffs zip tied on thier(movable) whitch open and close, and on the second row their is a rope tied between those handles with close pins to hold the rod tips from flopping around, now these actually work great ive actually takin them on the trail with me and still they do not hit anything, hope this helps, :cheers:
Garett

Kodakgallery.com LC rod storage
 
no worries mate! thanks for the quick follow ups. and i never even thought about varnish! sheesh. ( i got this worry about using paints that may release chemicals/lead inside..mind you varnish and contact cement smells will have to air out for a while too)

(now i juts got the idea of using superstrong black gorilla tape that is waterproof as some form of liner for my box, i guess replacing varnish in some parts...if it's not too $$)
 
yeah it does smell at first, yesterday I was scared to go anywhere in it, but today it doesnt smell, and that black gorilla waterproof tape is a good idea too
 
great looking storage drawers!

about the rods, i have always had three Velcro straps and have velcroed two rods to each grab handle. Works really well with the reel strapped to the rear handle and the rod pointing forward.
 
yeah im getting some velcrow to velcro the tips down, today I got hooked in the back of the head:bang:
 
That nice work there G. Saw you the other day by CC's Pizza and your truck is super sweet. See you on the 11th.
 
That nice work there G. Saw you the other day by CC's Pizza and your truck is super sweet. See you on the 11th.


thanks man, see you then:cheers:
 
great looking storage drawers!

about the rods, i have always had three Velcro straps and have velcroed two rods to each grab handle. Works really well with the reel strapped to the rear handle and the rod pointing forward.

You know, in my typical style I somehow managed to mess that simple solution up. :o I went fly fishing on a day long drive with my rod on my side the same way you worded it above and with my friend's rod on his side the same way as well. We pull up to this terrific Gold Medal trout stream, immediately start switching to waders when we realized we rudely left the two doors open towards the really narrow roads on each side of the "median" we were on and simultaneously we both walked up to our respective sides and simultaneously we both shut the doors. Milliseconds later (cause sound travels slower than light) we hear what we both just saw - our tippets getting gripped by the two doors! Arrgh! Apparently my spirited driving style (and probably in particular that last fully locked skid as we spotted the PERFECT place to park and fish) shifted the rods! :D :o :D The lessons we learn eh? Anyway the high and center approach would prevent even me from messing that up! :cheers:
 
Last edited:
Back
Top Bottom