Multi battery isolator and alternator question (1 Viewer)

[srich250]

I have a 97 Cruiser and want to know if the alternator is an "internally regulated" Nippondenso with remote sense? if so, the instructions for installing isolators requires a fused lead from the ignition wire to the E post on the Isolator.

thank you very much for the help
scott

 

[CycloSteve]

You may want to post what type of dual-battery isolation/charging system you are installing so those with similar systems can help diagnose.

Mine is a BlueSea and has no such wiring requirement.



Steve

 

[canman]

If it's the stock one it is internally regulated. If you have a Surepower isolator, wire it up as per the instuctions for Totoya, some Hondas and imports. My install is below.

https://forum.ih8mud.com/80-series-tech/448921-canmans-dual-battery-inverter-install.html

Connector on top of battery is for sensing wire to alt.

Schematic is attached.