Motorcraft Carb

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

TJDIV

UP of MI.
Mod Emeritus
Joined
Jan 28, 2003
Threads
157
Messages
2,061
Location
UP of Michigan
Website
www.roamwherever.com
Did a little searchy findy....


But still wondering here: I came across a guy that will provide me with a completely rebuilt Motorcraft 2BBL [350CFM] with all but 3 of the Vac. Lines elminated...around $200 I believe.

I know it's essentially a Weber, which is fine....but the Holley I'm running now sputters, etc and is on it's way to rebuild city or somewhere else in between.

Any thought on the price? I'm looking at a 2'fer, since my buddy's CJ-7 is in desperate need of the stock Carter Carb replacement.

Guy says these Motorcraft's work great and I haven't read anything bad about them. I figure instead of dropping $40 to $50 on a used one and then building linkage, getting adapters, etc....(which I already have the the Holley) that I could coin up for the Fresh Carb.

Thoughts? I'm sick of the "sputter sputter"
 
well, i have a motorcraft carb, i'm not sure what model(tisk tisk) but, it seems to work fine on my cruiser....initially when i put it on it gummed up and always ran fat flooding every now and again whenever the hell it wanted. after i had it rebuilt it worked great. i had some trouble with the throttle sticking in the linkage....didn't find that out til i was wheeling...what a nightmare but i cut some parts off with the grinder and now everything clears. it was a little tight by the master cylinder and that's what hung up my linkage. 200 is about what i paid for mine and it works great now so i would definitly say go for it.
 
Motorcrafts work great. I've got maybe $30 in mine, including buying the adapter. I haven't had to rebuild this one yet, but from what I hear they are super simple to rebuild. The linkage was the only pain in the ass part.
 
JasonH said:
Motorcrafts work great. I've got maybe $30 in mine, including buying the adapter. I haven't had to rebuild this one yet, but from what I hear they are super simple to rebuild. The linkage was the only pain in the ass part.


This is my only concern. This cat supplies the linkage, an installation CD on vaccuum lines [a good thing for carb amateurs like me] and an air cleaner kit.

I'll go for it and post feedback I guess. Hell, it's only money. :doh:
 
I should say figuring out the linkage was the pain in the ass. Building it wasn't that bad. Texican really did the work on that part. If you want, I can get some pictures of it tonite. It wouldn't be hard to duplicate.
 
Buy once, buy well.
 
Back
Top Bottom