Motor Pulled!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 29, 2006
Threads
12
Messages
363
Location
Redding,Ca
Well, I pulled the motor at about 112k miles to deal with a number of problems. I bought my 97 6 or 7 months ago from a wholesale lot. Saw it sitting there for months. Clean & had not ever even tasted dirt. Got about 200 miles on it and thats when I started feeding it oil every other tankful:confused: Anyway, I knew that this would be better than my 91 with 240k miles for a "keeper". I think I had all the bad luck this last month as my fan clutch stopped working properly & I blew the HG. I have been planning the Turbo build & had started stacking up parts. So Im going to try and address all the issues at the same time. I will probably be asking for lots of Ideas & opinions as I plan to Remote mount the Turbo. I took pictures with my cell phone so.. Sorry about the quality.
enginepulled.webp
 
HG was devastated on cylinder 1 & 6. Someone had just put in a cheesy rebuild. There were Heat tabs on the head. Cheese was everywhere! Rings were gapped wrong, bearings were all new. I don't even know if it was a OE HG. I'm glad I didn't just do a HG. I spoke with a Tech at ARP on friday and he is going to help me with a Head stud conversion. Hopefully this will help! No more stretch bolts! Has anyone already got the part # for the studs. I think the head has already been surfaced.
blown.webp
img207.webp
 
Another cool project... very nice.

2JZ studs are a nice fit for the 1FZ. I ordered a set w/ +.5" increased length and it was unecessary. Search around a little and you'll find some good info on on building your 1FZ into a nice hi-po unit.
 
What is your HP target?

The factory head bolt have been used up to 19 psi on a intercooled gt40 befor leaking if I recall correctly. Since you have pulled the engine, any thought's about going for a thicker copper head gasket? The gasket is an off the shelf item from SCE. Any plans on the transmission?
 
[ARP on friday and he is going to help me with a Head stud conversion. Hopefully this will help! No more stretch bolts! Has anyone already got the part # for the studs. I think the head has already been surfaced.[/QUOTE]


I used there kit for the supra and it worked fine.
 
Thanks guys! This will save me time. My Suburban is a no resale value time bomb. I will be selling it as soon as the 80 is back together. Cattledog- I have not had very good luck with copper gaskets & boost. I may just be missing something. I've tried o-ringing the block, still did not seal for very long at 15psi. This was on an all aluminum engine though. I thought about calling Cometic or Felpro to see if they could build a MLS, but haven't yet. MLS & ARP studs I believe will solve all our head sealing problems. I looked at the internals with my engine builder and was impressed with how hardcore the rods & wrist pins are. Are the rods forged? Im gonna do a search. I don't have HP goals yet. I just know it will have a lot better driveabillity. My goal is to have a good smooth curve without compromising the off road capability. Did someone say 19lbs? Was that on stock internals? I could see it with a good HG, fuel & timing control. Thats over the top!
 
About the transmission. Any thoughts? Now is the time. I was just thinking about tweaking the stall for initial take off. But I'm not a transmission guy & don't want any negatives off road. I understand these are great transmissions & it works perfect now. Need Ideas please. Thanks-Andy
 
The internals bit the dust at 22 or 23 psi with nitrous oxide, I think 100 hp shot. The person shoved the 1fz-fe into a crown. Do a search and it will come up.

The rods are hot forged and double shot peened per the SAE ref # 930876.
 
I talked to Cometic a couple years ago, at first they seemed receptive to producing a gasket, then they stopped returning calls... Maybe you will get somewhere with them.

Being that the tranny is shared with many other Toyotas, hi-po versions are available from the aftermarket. If you are looking for additional beef, you may want to compare the FZJ unit with those from the V8 Tundra, Lexus V8 cars, Supra Turbo, etc to see if they have some upgraded parts... additional clutches in the packs, better materials, bearings????
 
A MLS head gasket option would be awesome. Definitely the weak point of the 1FZ. The hard part will be convincing Cometic or Felpro that there's a market for it.
 
Thanks, that was interesting. I'll ask my tranny guy in the morning. I was thinking of valve body work. But this seems to be more my speed (read.. budget). Im starting to feel the $pain$ My head was hammered. Should get the motor back on thursday:grinpimp:. The newest plan is to use all stock internals, ARP studs, new bearings,and had the new OE rings gapped with boost in mind. The valve adjustment was done & the whole head was rebuilt. The head was probably surfaced before & had to be done again. I am going to leave the combustion chambers alone so, I may need some timing control to avoid detonation. We'll see. My turbo is no GT35, but about the same size. It is from a small CAT. LOL. It was free. with around 100hours of use. It will be interesting.

The turbo will be in the spare tire area. I found a plastic mold company here locally for the snorkel. The intake will come up through the floor where the jack is & out the side up to the roof. Sounds silly, but I think it will be cool. I hope the plastic shop can help. I need it to look good. The intake is my biggest hurdle. I tried to photo shop the intake plan, but I suck at that stuff.
 
I'm not a mechanic.... Im a desk jockey with a nice shop full of tools. My business partner is also the head tech at the shop. It took me about 12 hours and I had him help the last 3. That was to a stripped longblock. That was on a lift too. It wasn't easy but it was fun! I hate being stuck in the sales office all day. I think it would be ok at home. Pull the motor over a weekend with a friend. As long as you had access to the necessary tools. -Andy
 
When we pulled Kirk's 1FZ we had (besides the engine hoist) a 10mm, 12mm, 13mm, a few 14mm's, a 17mm, and a 19mm and I thinka sawzall for the exhaust downpipe....along with a couple of big pry bars...

That said, he did not take his tranny out...just the 1FZ.
 
Thanks. I still think it might be a good move to just pull the motor to do the oil pans and the HG. I'm hearing 12 hours for the oil pans alone, so the extra time to do the HG, as well as easier acess to all the little heater hoses might warrant the trouble.
 
Back
Top Bottom