More Steering Woes

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 5, 2003
Threads
319
Messages
2,206
Location
San Antonio TX
OK, I got all of the TRE's in and the truck drives straight,, except when I hit the brakes but that's another issue,, I also rebuilt the center arm box so, It does handle alot better but when I turn the wheels do not come back to center very fast, but it does return, Is this still a question of adjusting the center arm off another half turn? what do you guys think


Kevin
 
Kevin, is your truck lifted with a shackle lift? I'm not steering guru, but I think caster can play a role in not wanting to return to center. FSM says to adjust the center arm by loosening the locking bolt in the center then tightening the large nut all the way and back it off 1/4 turn then re-tighten the locking bolt. I don't think the center arm is ever the problem with not wanting to center.
Post more about lift/springs/shackles.

GL

Ed
 
I bought the rig this way, I believe these are aftermarket shackles, from bolt to bolt they measure 5.5" .

Thanks
 
Last edited:
Shackle lift is the worst offender in terms of caster. I don't know what size tires you are running or what your application is, but if you go back to stock length shackles or install caster correction shims, your problem will(most likely;) ) go away.

GL

Ed
 
If your steering does not return back to center.. the center link is to tight... I
 
grant5127 said:
If your steering does not return back to center.. the center link is to tight... I

OK, that's an easy fix;)

Ed
 
Back
Top Bottom