Modified lower rear control arm

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 30, 2003
Threads
161
Messages
1,929
Location
Texas, Pinas and Germany
I've noticed that a lift of 5" plus move the wheels noticeably forward and the 80 looks uneven. Reshaping the lower arm , moving the pivot point forward or using drop bracket should correct this. I would rather do the reshaped arm if it is available.
 
What about having longer arms built? Then you could run Johnny Joints or something similar to get better flex. The one thing I would be worried about is where the axle will sit at full stuff...

Yup, that's something that many don't think of when they lift, see the rear axle "sitting forward" and then try to move it back.
As the end of the axle moves upward (stuff during flex) it'll move backwards.
If you lengthen the control arms, or otherwise move the axle rearward (on a lifted vehicle) so that it sits "centered" in the wheel well the larger tire may get into the rear edge of the wheel well during stuff.



:)
Fred
 
I don't need a lot of flex for my intended use. Wheel up travel will be limited to about 5" with extended drop.
 
Yup, that's something that many don't think of when they lift, see the rear axle "sitting forward" and then try to move it back.
As the end of the axle moves upward (stuff during flex) it'll move backwards.
If you lengthen the control arms, or otherwise move the axle rearward (on a lifted vehicle) so that it sits "centered" in the wheel well the larger tire may get into the rear edge of the wheel well during stuff.



:)
Fred

Exactly, extending the arms to make the wheel centered in the wheelwell when it is not flexed/stuffed means that this is not possible (6" Slee lift, 37" Iroks):

371.JPG
 
So how did you figure that you have "extended droop" and less or little uptravel ?




:)
Fred

Sorry. What I meant is extended bump stops. I won't be stuffing tires coz they stick out 3" and just making sure top of the tires won't hit the flares.
 
Back
Top Bottom