Moab wheelin'

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Depends on wether or not u mind body damage?
But ive run them all with no more than stock front and rear bumper damage,and ofcourse u may get the standerd brush marks.
 
Has anyone found any Moab trails to be too narrow for the 80?

I haven't seen a narrow issue on any that I have run. I have hit the rear bumper/receiver hitch a bunch, but that is from angles, dropping off ledges, etc.
 
Kane Creek will give you some brush scratches. Elephant Hill has a couple of tight places, but as long as you're careful it isn't a problem.

There are a lot of ledges that can cause significant rocker panel damage tho, so a good set of sliders is strongly recommended.
 
A trail I ran in my 4Runner called "The Pickle" may have been a different story in an 80. Back in the day, "Lower Helldorado" (RIP) would have been doable, but a little narrow in certain areas for a 80.

Honestly, 80 or 100 width is not really an issue on most trails in Moab, it's if you drive a phat hummer (H1).
 
Thanks all. I want to try to avoid body damage if possible. I thought Kane Creek might be a bit narrow. I am usually on a motorcycle out there so the 80 is gonna feel PHAT! Anyone done Amasaback?
 
When are you gonna be there? I'll be there the 29th and 30th.
 
watch out for the body snatcher on Spike, that did a number to a pass side door, but I was being stuborn on it.....
 
watch out for the body snatcher on Spike, that did a number to a pass side door, but I was being stuborn on it.....

Or if you don't have a good spotter, take the step to the right. It's a pretty good step, but wide open, so little chance of dents.
 
When are you gonna be there? I'll be there the 29th and 30th.

I probably wont be there until Feb. when the warm up starts. It is only 2.5 hours drive for us so in the winter we just watch the weather and then decide whether or not to go. There is a bunch of us that go every year for car show weekend in April.
 
watch out for the body snatcher on Spike, that did a number to a pass side door, but I was being stuborn on it.....

On our last trip we all avoided the body snatcher. No reason to get smashed up. Bumpers are nice for the crack.

Plenty of other fun stuff on Golden Spike to be had.

TR
 
I probably wont be there until Feb. when the warm up starts. It is only 2.5 hours drive for us so in the winter we just watch the weather and then decide whether or not to go. There is a bunch of us that go every year for car show weekend in April.

You must drive like a BAT OUT OF HELL!!! I live in A-town and it normally takes me 4 hours, but let me know when you want to go.

BTW, which 80 is yours in the RF Valley? I like to think I know most of them!;)
 
Just got mine this week. I normally drive fast in my 454 GMC (8mpg). I expect to add many minutes to that when I start taking the 80 to Moab. I will be driving my '94 dark green stocker for a few weeks before making any changes. First things first I have to get rid of the RB's. I have been trying to contact CruiserDan for flaps. It will be in SMV lot 5 during the days and in Bondale at night. By any chance is yours the 2 tone grey rig I see once in a while? Which one is yours?
 
There's two nice champagne 40th Anniversaries. One based in SMV the other in A-town. The one in SMV has Slee front & rears, 12000# Warn, 3" OME riding on 285/75s with the black teflon wheels. The one in A-town has ARB front, Kaymar rear, ARB roofrack, snorkel, supercharger, 8000# Ramsey, ARB F&R lockers, 315s. It was my rental for the last three weeks since my wife totaled ours. I picked up my new one yesterday from the Front Range...
View attachment 198060

View attachment 198061

...You name it, it's got it.:cool: I'll be throwing my old roof rack on it tomorrow...
View attachment 198062
 
Last edited:
Nice rig. Are you in the North 40? I saw one coming out of the community accross from BM that headed up owl creek towards SMV a couple of weeks ago. I was going to Aspen so couldnt catch up. I have been looking for it in SMV for 2 weeks to see what he's got on it. This may jog your memory, he has his spare on the roof? I will post some pics soon. I am having a hard time giving up my '91 CRX 40+ mpg for this gas guzzling pig, but it should be fun. Plus it has heat as my Honda's heater broke 4 years ago. Makes for chilly commutes from Carbondale.
Can you give me a list of what you have installed on yours? Thanks
 
For the sake of Tech and to keep Romer from moving us to Chat:
A stock 80 is a lot of fun in Moab. Your first priority should be sliders (read my thread about cheap sliders) to avoid expensive body damage. Factory lockers are nice (got 'em?). Second is departure angle, especially at stock height IMHO. I was just about to build a new rear bumper with integrated receiver hitch for my dead cruiser. If you want to buy the steel, I'll do the welding for free (:beer:). It would be similar to Land Speeders bumper. PM me for more info.

You saw my now deceased 80 on it's morning commute. My new one is much nicer.:grinpimp: There are a number of Toyota people I wheel with in the valley. Although unorganized, years ago I came up with the name of my informal club, T'N'A (Toyotas iN Aspen).

Since I didn't see your intro thread, WELCOME TO MUD!

Nick

:flipoff2::flipoff2::flipoff2:
 
Back
Top Bottom