Mittler Bros. Power Hammer Kit -at Trick-Tools (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 24, 2010
Threads
2,226
Messages
2,226
New to Trick-Tools is the Mittler Bros Power Hammer Kit. This recent addition to their ever growing metal shaping tool line-up resembles the 60lb Yoder M2 Power Hammer and is available in a fabrication kit that includes the power hammer components, giving you the freedom to build your own custom power hammer frame. This power hammer can also be purchased as a complete unit with no fabrication required.

The Mittler Bros Power Hammer Kit can perform shrinking, stretching and shaping in sheet metal with a variety of optional die sets and utilizes a leather strap & leaf spring to support the upper die assembly. This set up provides a cushioned blow, similar to a mallet and shot bag, only at a rate of 900 blows per minute. For more information about the Mittler Bros. Power Hammer Kit, give us a call at 877-826-7268 or visit our website, www.trick-tools.com?utm_source=rss&utm_medium=rss.

The post Mittler Bros. Power Hammer Kit -at Trick-Tools appeared first on RockCrawler 4x4 and Offroad Magazine.

Related posts:

  1. Ron Covell Rounding Over Dies – Press Release from Trick-Tools
  2. MetalAce 30F English Wheel from Trick-Tools
  3. Trick-Tools JMR TB-1000 Tubing Bender

Continue reading...
 

Users who are viewing this thread

Back
Top Bottom