mini truck brake conversion help

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 21, 2005
Threads
123
Messages
519
Location
granger, indiana
I have a 68 FJ40 that I have done the mini truck disk brake swap on and have some clearance issues. I used 81 cruiser rotors (vented) and 86- 91? IFS calipers. Everything went well until I bolted the wheels back on. The very inside edge of the caliper hits the wheels. I got some 93 calipers from an IFS truck because they have a half round cut out that looked to fit. Well they clear in the spot I had trouble with but now don't clear in another spot because they are too wide. I have read extensively on several web sites about this conversion and have not read anything about wheel issues. I have plain old steel spokes that were the correct offset to clear 12.50 wide tires and the cruiser steering arms. Anybody have any suggestions? I am at a loss and tired of going to the parts store. Thanks for any help. Tom
 
Back
Top Bottom