Mini PS setup

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 5, 2003
Threads
319
Messages
2,206
Location
San Antonio TX
Will a mini PS setup from an 86 mount or can be mounted to a 40 for the PS conversion?
 
Its from '79 to'85 box that is used.... the trick is.. you gotta have approx. 4.5 revolutions of turn on the input side to make a 40 swivel its max turn radius..
 
Or you can make them yourself if you have a welder. :hillbilly:
 
Last edited:
Mini info and brackets

I have both brackets to do the Mini truck gearbox and
the Saginaw P/S pump.That includes all the mounting
hardware,spacers and adjusting arm.
They are $95.00 each plus shipping. If you buy both
they are $180.00 plus shipping.
Send me your address and what you want and I will
email you a total.
You can see pictures at the below web site and a good
post on ih8mud. Thanks
Bill

http://photos.yahoo.com/wdorry
https://forum.ih8mud.com/showthread.php?t=65318
 
I have both brackets to do the Mini truck gearbox and
the Saginaw P/S pump.That includes all the mounting
hardware,spacers and adjusting arm.
They are $95.00 each plus shipping. If you buy both
they are $180.00 plus shipping.
Send me your address and what you want and I will
email you a total.
You can see pictures at the below web site and a good
post on ih8mud. Thanks
Bill

http://photos.yahoo.com/wdorry
https://forum.ih8mud.com/showthread.php?t=65318

I've installed 3 complete sets of the above bracketry.. alll worked out great.. the best ideas so far......
 
Will a mini PS setup from an 86 mount or can be mounted to a 40 for the PS conversion?
I have not tried the IFS box on a Cruiser. But it's commonly used for crossover steering on SFA mini's, so it should work on a FJ40 w/ solid axle.

It is reverse rotation from a FJ60 box, so the mini box would be mounted farther forward, w/ the pitman arm pointed backward.

http://www.sky-manufacturing.com/steering1.htm
Has mounting stuff and various pitman arms for that box.

:cheers:
 
I've seen one IFS box setup. Just glanced at it, so it may be possible to make it work differently, but it was mounted way forward. pretty much were a Sag box would go, but omn the outside of the frame. At least it did not interfere with winch choice, but overall I didn 't like it out there. May juts be my own predjudice though 'cause it was more of a gut reation than any specific drawback that I can point to without sitting and pondering.


Mark...
 
Back
Top Bottom